wheels for cj 8
bareboatin
Jeeper
Are there any stock 15" or 16"wheels from other vehicles , example Ford, Chevy Etc. that will fit my 83 CJ 8 with manual front hubs. Youe need the big center, because of the front manual hubs. tks Chuck
wheels for cj 8
- Thread starter bareboatin
- Start date
LongHorn
Always Off-Roading Jeeper
- Posts
- 5,325
- Thanks
- 1
- Location
- Washington Co.,Texas
- Vehicle(s)
- 83'CJ-8 Scrambler Slightly Modified;),48'CJ2A, 54'CJ3B 67'Jeep M-725, 88'YJeep Wrangler Slightly Modified;)
Ford or Dodge 1/2 ton at least up to the 90's. they are 5 on 5 1/2"
fishinfool98
Chat Picasso
- Posts
- 1,644
- Thanks
- 9
- Location
- Blounts Creek NC
- Vehicle(s)
- 1985 cj8 streched to 118in wheel base, shackle reversal soa, chevy vortec 350, turbo 350, dana 60 front and corp 14 rear, custom bumpers front and rear
2006 Ford F350 CCLB with the dreaded 6.0 that has given me no problems
ford ranger wheels should fit
2lostspace
Jeep-CJ.com Moderator
The ones on my 93 Ranger have a smaller bolt pattern and will not fit my CJ7. Might have to look at older rangers.
- Posts
- 23,051
- Thanks
- 150
- Location
- PA
- Vehicle(s)
- 1982 CJ-7 258 / T-18 / Dana 300 31 in All Terrains.
1978 CJ-7 304 / TH 400 / Quadratrac 32 in Mud Terrains
Ranger / Bronco II are 5 on 4 1/2. You need to back away from that Yj a bit. :laugh:
LongHorn
Always Off-Roading Jeeper
- Posts
- 5,325
- Thanks
- 1
- Location
- Washington Co.,Texas
- Vehicle(s)
- 83'CJ-8 Scrambler Slightly Modified;),48'CJ2A, 54'CJ3B 67'Jeep M-725, 88'YJeep Wrangler Slightly Modified;)
When I said Ford & Dodge 1/2tons I was talking about fullsize. Not half-breed ricegrinders.
fishinfool98
Chat Picasso
- Posts
- 1,644
- Thanks
- 9
- Location
- Blounts Creek NC
- Vehicle(s)
- 1985 cj8 streched to 118in wheel base, shackle reversal soa, chevy vortec 350, turbo 350, dana 60 front and corp 14 rear, custom bumpers front and rear
2006 Ford F350 CCLB with the dreaded 6.0 that has given me no problems
forgot that my temporary axels for the monent are from a yj
the rims from a scout 2 bolt right up though
the rims from a scout 2 bolt right up though
TJandMe
Jeeper
I know you said stock but the Cragar series look stock and are cheap at about $50/wheel.