4.0 engine swap help!
defibvt
Senior Jeeper
- Posts
- 763
- Thanks
- 7
- Location
- AZ
- Vehicle(s)
- 1974 CJ5, 4.0L stroker from a 91 XJ,T-18 w/ granny gear, Dana 300 w/ Lomax 4:1 gears.
So I have a 74 CJ5 . I have a T-18 tranny and a Dana 300 Transfer Case . I am attempting to drop in an an XJ 4.0 from a 91 XJ. I don't know what I am doing wrong. My engine mount holes will not line up. I have about 2.5 inches until the valve cover hits the firewall. I am attaching images. I do have the XJ engine side motor mounts and the original AMC 232 i6 frame side motor mounts. I also have AMC 258 i6 / 4.2l motor side and frame side brackets.





Last edited: