Fixed it to break it
justinkase
Jeeper
- Posts
- 64
- Media
- 7
- Thanks
- 0
- Location
- Laramie, Wy
- Vehicle(s)
- 1985 cj7, 4.2L I6 w/.06 overbore, T-5, dana 300, amc 20, dana 30, 4.10 gears
Yesterday I took my cj out for a test run after replacing my rear u-joint for the second time in two weeks. And I broke my driver side hub. Was going over a good sized rock and heard it break and watched pieces of it bounce on the rocks next to me. Starting to think that this thing does not like me.
So how hard is this going to be to fix? I think that this fix is pretty start forward, but I've said that before and was wrong.
Also I read somewhere that you could put a little oil in a drive shaft and that will help balance it. Will that really work? Any advice would be great. Thanks
So how hard is this going to be to fix? I think that this fix is pretty start forward, but I've said that before and was wrong.
Also I read somewhere that you could put a little oil in a drive shaft and that will help balance it. Will that really work? Any advice would be great. Thanks