Looking for a little front axle help, please
dpuck
Jeeper
- Posts
- 86
- Thanks
- 0
- Location
- Saint Augustine, Fl
- Vehicle(s)
- 78 CJ7, stock 304 with Eldabrock 600 4 bbl. carb., Dana 30 front, T150 Trans, Dana 20 TC and rear axle, Warn 8000 winch. Original paint, running 31's on original spoked wheels. 2 1/2" lift springs with 1/2" lift heavy duty shackles.
Getting sterted on the front hubs on my Dana 30 front axle (78 CJ) and ran into a snag right off the bat. The outer locking nut is ROUND with about 5 or 6 small holes in the face. I tried budging it with a punch, but I could only get it ti rock back and forth a small amount. Antone ever see this or have any ideas? It would be greatly appreciated.