pilot bushing to bearing swap
chooch
Jeeper
want to swap my 84 AMC 258 i6 / 4.2l pilot bushing to a bearing cause of some galling on input shaft,any success out there?
pilot bushing to bearing swap
- Thread starter chooch
- Start date
IOPort51
NOT the voice of reason Jeep-CJ.com
- Posts
- 13,959
- Media
- 458
- Thanks
- 11
- Location
- Garland Texas
- Vehicle(s)
- 1977 cj-5
4.2 W/MC2100 carb, 4.0 head W/3 angle valves,SS Header,TFI ignition with MSB-6 offroad module,CS144 140 amp RPS alternator with remote regulator T-150,d-20,Dana 44 with OX lock and disk brakes. D-30 with Spartin locker,
skyjacker 2.5 lift?nitro shocks,31" BFG A/T off road.8000 lb Warn winch, original owner.=^)
2006 Toyota Tacoma
If your having trouble finding it here:
Original Replacement Parts 3236726 - AMS Automotive Pilot Bushing for 80-86 Jeep® CJ Series with 4.2L, 304ci & 360ci V-8 Engines - Quadratec
I rented a puller from Auto zone and it gave me fits being mine was galled out badly. I went to another Auto parts place and rented one that was slightly different and it worked first time.
Original Replacement Parts 3236726 - AMS Automotive Pilot Bushing for 80-86 Jeep® CJ Series with 4.2L, 304ci & 360ci V-8 Engines - Quadratec
I rented a puller from Auto zone and it gave me fits being mine was galled out badly. I went to another Auto parts place and rented one that was slightly different and it worked first time.