Trouble locating a new F134 rear main oil seal

[Preacher Boy]

Anyone got any suggestions? I have a F134 Hurricane and in the middle of a rebuild and having trouble locating the rear main oil seal. Every company I called says they are no longer selling them. I was sent 2 rope seals in my kit but these are to thick I believe and I was told to try and stay away from the rope seal and get the neoprene seal.

 

[JR74CJ5]

Don't know much about it personally, but this was one of the first links i found on google.

F-134 Rear Seal Replacement Drama Continues

there's a link in the second post. But might want to read the whole thing.



~ JR

 

[Preacher Boy]

Thanks. Got one.

 

[JR74CJ5]

Let us know where from too, just in case someone goes looking and finds this thread, it will have a "ending" lol



~ JR

 

[Preacher Boy]

Good call. Kaiser Willy's is the name of the company. I think they are in SC.

 

[JR74CJ5]

This look like the right part number you used / bought?

Gasket Sets & Oil Seals - Neoprene Rear Main Oil Seal <br>Fits 41-71 Jeep & Willys with 4-134 engine

May need to trim it a bit...

Cheers Hope it works out well!

~ JR

 

[Preacher Boy]

Hopefully it is. It gets here on Thursday. Friday we will hopefully put the hing back together.

 

[Preacher Boy]

Ok seal not working. I think it is to thick. I put it in hand cranked it over a couple dozen times to get timing lined up. Robot to put flywheel bolts and looked at the seal and it is ruined back to square one.

 

[Sasquach]

Ok seal not working. I think it is to thick. I put it in hand cranked it over a couple dozen times to get timing lined up. Robot to put flywheel bolts and looked at the seal and it is ruined back to square one.

Go to the 3bpage for info regarding the F134 Hurricane . Join the forum if nessesary and post in wanted.
Peter Debella Jeep parts should also have what you need.
Another good source would be Walck's Jeep parts.