Wheel bolt patern
ftwflh
Senior Jeeper
- Posts
- 664
- Thanks
- 0
- Location
- Crossville,IL
- Vehicle(s)
- 1976 CJ 5, 232 6cyl 3spd lots of rust,good frame,Dana 44s w/373 gears,ProComp 4in lift kit
Wheel bolt patern
- Thread starter ftwflh
- Start date
CJ
Admin
- Posts
- 21,789
- Thanks
- 633
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
5 X 5 are the correct hole spacing, BUT - the center hole may not clear your hubs / flanges.
jeffgtoman
Jeeper
- Posts
- 212
- Thanks
- 0
- Location
- Indiana
- Vehicle(s)
- I have a stock 1985 CJ-7 with 258 inline 6 engine 4 speed amc 20 rear diff. with 2.71 gear ratio.
1967 Camaro convertible. (for sale).
2001 F-250 Crew cab, 7.3 diesel.
2005 Honda TRX 350 EX quad.
46-86 CJ used 5 X 5.5" bolt pattern, not 5 X 5". It is also the same as 5 X 139.7mm.
You can find 5 X 5.5" on full size Bronco's, 45-95 Ford F-100/150 and E-100/150, 94-01 Dodge Ram.
You can find 5 X 5.5" on full size Bronco's, 45-95 Ford F-100/150 and E-100/150, 94-01 Dodge Ram.
CJ
Admin
- Posts
- 21,789
- Thanks
- 633
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
Thanks Jeff, I stand corrected - 5 X 5.5 - (made a typo moment forgot the .5), STILL, be sure the center opening is large enough to accommodate your hubs and such.
mylittlecj5
RIP Mike, we'll all miss you
- Posts
- 4,939
- Thanks
- 2
- Location
- OKC area
- Vehicle(s)
- '74 CJ-5,
360 AMC Engine.
35x12.50x15 TSL Super Swamper tires.
In a frame off rebuild for a long time...
Most every aftermarket wheel I've ever seen with this pattern has had the hole big enough to accommodate the front hubs. Its when you get to the stock style wheels that you gotta watch it.
International 1/2 tons and Suzuki Samurais also used these wheels, as well as a few others.
International 1/2 tons and Suzuki Samurais also used these wheels, as well as a few others.