Grinding is a type of abrasive machining process which uses a grinding wheel as cutting tool.
A wide variety of machines are used for grinding, best classified as portable or stationary:

Portable power tools such as angle grinders, die grinders and cut-off saws
Stationary power tools such as bench grinders and cut-off saws
Stationary hydro- or hand-powered sharpening stones
Milling practice is a large and diverse area of manufacturing and toolmaking. It can produce very fine finishes and very accurate dimensions; yet in mass production contexts, it can also rough out large volumes of metal quite rapidly. It is usually better suited to the machining of very hard materials than is "regular" machining (that is, cutting larger chips with cutting tools such as tool bits or milling cutters), and until recent decades it was the only practical way to machine such materials as hardened steels. Compared to "regular" machining, it is usually better suited to taking very shallow cuts, such as reducing a shaft's diameter by half a thousandth of an inch or 12.7 μm.
Grinding is a subset of cutting, as grinding is a true metal-cutting process. Each grain of abrasive functions as a microscopic single-point cutting edge (although of high negative rake angle), and shears a tiny chip that is analogous to what would conventionally be called a "cut" chip (turning, milling, drilling, tapping, etc.) . However, among people who work in the machining fields, the term cutting is often understood to refer to the macroscopic cutting operations, and grinding is often mentally categorized as a "separate" process. This is why the terms are usually used separately in shop-floor practice.
Lapping and sanding are subsets of grinding.

View More On
  1. shooby

    Clutch Do I have a clutch problem?

    1978 CJ-5 with V8 and T18 Transmission. Hydraulic clutch. I see conflicting opinions on this but here goes: When I try to put it in 1st or Reverse, most often I have to grind the gears. Yes, I put it in 2nd gear first and that is absolutely necessary but I still have to jam it to get it in...
Top Bottom