225 V6 power steering bracket

[CJrider67]

Hello everyone. Im new to the site and fairly new to jeeps. Im sure that this has been asked before...but....I need some help finding a power steering pump bracket for a Dauntless Buick 225 V6 225. I have the pump and pulley....just need the bracket. Any help would be great.

Thanks

 

[Posi]

Any Buick 350 or v6 should fit, check ebay their anywhere from $25-$65

 

[Torxhead]

Another option would be j&w auto wrecking if Posis suggestion does not pan out.

 

[CJrider67]

Thanks for the quick responses.Ive bee hunting on ebay and cant seem to come up with one that I know for sure will work. I'm under the impression that I need a set of Brackets (front and back). Torx....ill try your option and see what I can come up with.

Thanks again

 

[mstar]

you could probably use something off a 231 engine. I used a aluminum bracket and pump off a 60's buick 300 v-8. Those are getting hard to find in salvage yards. It bolts to front of cylinder head and lines up with exsisting crank pulley.A two piece stamped steel bracket may be trial and error to make work. mike

 

[mstar]

I just checked ebay and there is a aluminum bracket on there for 1966 buick. I think I saw a buick pump also. mike

 

[CJrider67]

Thanks....ill keep looking. Trying to make one but not sure if its gonna work or not yet. I will let everyone know if it does. Can you guys send the links to the ebay ones so I know which ones you are seeing.

 

[CJrider67]

Well i got the brackets. Had to make the one that bolts to the block and found the front one on ebay. Now I just need the pressure line for the pump.