Build Thread Another cj build
Jimbos76cj
Full Time Jeeper
- Posts
- 2,223
- Thanks
- 1
- Location
- St.Cloud FL
- Vehicle(s)
- 83 CJ-7.. 4" YJ springs front rear, J-10 44 front/AMC 20 rear,6 cy auto dana 300 35' bfg Done and gone!!
Ask me about my head light upgrade harness!!!
I just sold off about 80 percent of my CJ mudtruck project to help fund the completion of my YJ. Things are moving right along with it and going well. A buddy decided to put his rust/rot free 79 frame up for sale and I was able to trade him a and full of parts for it.
Heres the frame
I figured Id sit on the frame for a while and devote my time and money to finishing up the YJ. I got a text from a buddy about a tub for $250 and couldnt help my self.
Tub is in pretty good shape.. Id say a 8 of 10 as far as rust goes. a little bit under the jeep logo and some across where the cowl seal meets the tub but nothing that wont be reapirable. I had already picked up a CJ front clip for my Yj so now they will go on this gem.
The tub also had has the brake booster, clutch master, steering column, soft tup frame work and soft top tub rails. Not looking to shabby
Over the last few months Ive picked up an extra AMC 258 i6 / 4.2l , AX-15, I already have a set of 4:10 geared Dana 44 's. the axles are locked and are already set up for SOA. Im still short a bunch of parts but atleast the majority of the expensive parts are here..
Heres the frame
I figured Id sit on the frame for a while and devote my time and money to finishing up the YJ. I got a text from a buddy about a tub for $250 and couldnt help my self.
Tub is in pretty good shape.. Id say a 8 of 10 as far as rust goes. a little bit under the jeep logo and some across where the cowl seal meets the tub but nothing that wont be reapirable. I had already picked up a CJ front clip for my Yj so now they will go on this gem.
The tub also had has the brake booster, clutch master, steering column, soft tup frame work and soft top tub rails. Not looking to shabby
Over the last few months Ive picked up an extra AMC 258 i6 / 4.2l , AX-15, I already have a set of 4:10 geared Dana 44 's. the axles are locked and are already set up for SOA. Im still short a bunch of parts but atleast the majority of the expensive parts are here..