Brake booster bracket?

[350CJ7]

I have a 86 CJ7 that I did a YJ pedal swap. Question I have is. After reading as much as I could find. I'm not totally sure if I can use my CJ firewall booster bracket. I've read that using the YJ pedals you need the YJ booster/mc. Does the YJ booster bolt to the CJ bracket? Or is that where the ratio and push rod centerline change at?

 

[gert]

Hmm this should be a good one, I didn’t get the pedals with my tub so I can’t help you there but I did convert my pedals to hydraulic clutch, I don’t remember having to redrill my YJ tub to match my CJ booster either


Sent from my iPhone using Tapatalk

 

[350CJ7]

Ok, I've got some more info. Appears that the CJ bracket has a cantilever type system. And the 87-94 YJ the booster has a longer pushrod that connects directly to the pedal. The pivot point of the two masters to the pedals are different. Gonig to see if I can move the booster arm pivot pin on the YJ pedal to line up with the original CJ geometry.