CJ-7 Brake tidbits
PistolDave
Active Jeeper
- Posts
- 437
- Media
- 7
- Thanks
- 1
- Location
- Lubbock, Texas
- Vehicle(s)
- 1977 CJ-7 SBC 5.7 TBI, TH400, D300, D44 front, D44 rear, 4.56's Detroit / Truetrac, SOA, 35" MTR-K's,
------------86 CJ-7 258 - T5 - AMC20/D30 3.30 open f/r - Dana 300 - 2" BDS wrangler springs - 31x10.5 BFG
************* 83 CJ7 3.8L, T19 5.1:1, D300, D30/AMC20, 4.11's, Chevy TBI, OX lockers, OME 2.5" lift YJ springs, 33x10.50/15 KM3's, Lots of rust and zip ties.
I had my calipers off while fiddling around with the hubs, and noticed that the little rubber bushings that the caliper guide pins ride on were shot, so I replaced them, and replaced the brake pad clips while I was at it since they came in the kit. If you have this caliper (casting 103707) here is what it looks like. Part number for the kit @ O'Reillys was H5552, about 4 bucks.
