Frame CJ7 Sway Bar Link Bushings?
- Posts
- 40
- Thanks
- 7
- Location
- Rochester, NY, USA
- Vehicle(s)
- 1979 CJ7. 258cu 6cyl. T5 tranny/Dana 300 transfer case (both from '82 Scramber)
Frame CJ7 Sway Bar Link Bushings?
CJ
Admin
- Posts
- 22,405
- Media
- 766
- Resources
- 193
- Solutions
- 36
- Thanks
- 727
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
There are many kits with those bushings including the frame mounts.
- Posts
- 40
- Thanks
- 7
- Location
- Rochester, NY, USA
- Vehicle(s)
- 1979 CJ7. 258cu 6cyl. T5 tranny/Dana 300 transfer case (both from '82 Scramber)
Yes, thank you. I guess I should have mentioned that the sway bar and mount look new. But for some reason, the link bushings look original and in pretty bad shape. I didn't want to buy a whole new kit. But I may have no choice. Thanks for the help.
Oh, and also thanks to all the contributors and advice on the power brake installation. It's done (finally) and the old CJ stops on a dime.
Oh, and also thanks to all the contributors and advice on the power brake installation. It's done (finally) and the old CJ stops on a dime.
CJ
Admin
- Posts
- 22,405
- Media
- 766
- Resources
- 193
- Solutions
- 36
- Thanks
- 727
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
Glad the brakes work great.
I would replace all the bushings with a polyurethane kit for longevity such as this one.
I would replace all the bushings with a polyurethane kit for longevity such as this one.
TSB8C
Senior Jeeper
- Posts
- 889
- Media
- 20
- Resources
- 1
- Solutions
- 18
- Thanks
- 460
- Location
- Cut-n-Shoot, TX
- Vehicle(s)
- 1984 CJ7, 420 HP "ZZ6 EFI" Crate engine, 700R4, D300, Dana30 front, Dana489 rear, 4.56 gears, 4" lift
Energy Suspension offers just the end link bushings if you don't want an entire kit.
End Link Bushings
End Link Bushings