dash pad

[pismocj7]

Hey guys I'm kinda new to the Cj world I'm trying to put on a new dash pad on my 1980 CJ7 and I can't figure out how to get the old dash pad off can you give my some pointers maybe some pics

 

[Gunner Actual]

Some hidden bolts under windshield. Tilt it forward and you'll see about four there.

 

[pismocj7]

Thanks it helped alot

 

[DHugg]

Some hidden bolts under windshield. Tilt it forward and you'll see about four there.

You might consider a new rubber dash seal. Mine is shot (1980) and it is on my list the next time I tackle no fuel-no engine temp. In summer, water trickling down my knees is a good thing, but not good for the floor or the dash wiring.

 

[pismocj7]

That sounds like a good idea I have noticed some water on my dash after a good rain and my oil pressure, fuel and temp gauge are out . My next job to tackle is a new wire harness the guy that had this jeep before me like to jerry rig the wires with painters tape instead of splices and shielding . I also need a new or rebuilt steering column .

 

[johnnyreb]

yes i've got a new cowl seal laying on the bench for when I change my dash panel (hacked on). I noticed the other day wated dripping off the dash during a hard rain. Your steering column should be a GM column. I think a 76-80 will fit ours, i'm on the hunt for a tilt column. You might want to look into the blazer blower motor upgrade while your in the dash.

 

[pismocj7]

:grinjeep: ya I have a tilt steer right now a friend of mine has a billet tilt steering column and it looks real good I may scrape up enough cash to get one myself. As far as the heater goes I may just rip it all out since where I live never really gets cold but its not a big worry right now.


I wouldn't mind seeing pic's of other peoples jeeps inside and out for some custom idea's to mine.