Dust cover questions (T5, T177, AX15)

[cuban11182]

So I'm still gathering parts and figuring out what will work. I have a T177 that I have sitting in my garage, the T-5 that's in the CJ, and an AX15 that's also sitting in the garage. I have a dust cover that was used in an XJ with an automatic and it looks different than the one my dad has in his 94 with an AX15. My question is will the T-5 dust cover work with the T177? I already know that the AX15 needs one that is different than the one I have.

This is what I'm referring to: 1976-1990 AMC JEEP CJ5 CJ7 CJ8 YJ 258 360 401 ENGINE FLYWHEEL COVER MOTOR PLATE | eBay

Thanks.

 

[Posi]

So I'm still gathering parts and figuring out what will work. I have a T177 that I have sitting in my garage, the T-5 that's in the CJ, and an AX15 that's also sitting in the garage. I have a dust cover that was used in an XJ with an automatic and it looks different than the one my dad has in his 94 with an AX15. My question is will the T-5 dust cover work with the T177? I already know that the AX15 needs one that is different than the one I have.

This is what I'm referring to: 1976-1990 AMC JEEP CJ5 CJ7 CJ8 YJ 258 360 401 ENGINE FLYWHEEL COVER MOTOR PLATE | eBay

Thanks.

I just noticed your question went unanswered.

The only difference is the bolt hole locations where the Transmission bolts to the b-housing. This has nothing to do with the b-housing dust cover.

The dust cover in the link you posted should work if you have an AMC 258 i6 / 4.2l , AMC 304 , or AMC 258 i6 / 4.2l .

Hope this helps.