Build Thread Frame measurements
I was going to buy a used CJ7 frame for my build last week but when I got there to buy it he upped the price from what he quoted on the phone, I'm none too happy!
So I decided to build my own chassis as this will be a 2 wheel drive hotrod.
Is any one working on a CJ7 frame right now that would be willing to take some measurements for me? I have the Chiltons drawing but it leaves out critical measurements.
I need;
1. inside and outside frame width measurements at the very front and very rear of the frame
2. the axle centerlines:
Front, measured from front of frame back to front axle center line
Rear, measured from the rear of the frame forward to the axle centerline
3. frame width inner and outer at the fire wall and,
4. the overall length of the frame from front to back.
Your help would be appreciated so I can start drawing my frame on paper and then do a mock up in 2x4's
John
So I decided to build my own chassis as this will be a 2 wheel drive hotrod.
Is any one working on a CJ7 frame right now that would be willing to take some measurements for me? I have the Chiltons drawing but it leaves out critical measurements.
I need;
1. inside and outside frame width measurements at the very front and very rear of the frame
2. the axle centerlines:
Front, measured from front of frame back to front axle center line
Rear, measured from the rear of the frame forward to the axle centerline
3. frame width inner and outer at the fire wall and,
4. the overall length of the frame from front to back.
Your help would be appreciated so I can start drawing my frame on paper and then do a mock up in 2x4's
John