Msd ignition/ignition module

[Cl89]

I'm in the middle of doing a painless kit in my 1975 CJ5 with AMC 304 . It has a msd ignition, and the original ignition module with 4 wires coming out of it along with a ground. The msd has two original wires going to the distributor, along with black and orange going to the msd coil. It also has a red and a white wire coming out of it which I believe are trigger wires. Painless wiring has a pink wire, supposed to go to coil (+), and a pur/white wire that says coil (-). The msd instructions say to not hook anything else up to the coil, any ideas on what the 4 wires coming out of original ignition module do/where they go?

 

[Torxhead]

Junk Yard Genius.com Ignition Upgrade, AMC Jeep '74-'75 V-8 Engines, scan down a bit