Need a measurement please

[thescot]

Working on setting up the rear suspension still and have a request. Could anybody running a 2.5" spring lift measure from the center of the rear axle/rim/wheel cap, whichever works, to the outer edge lip of the rear factory flare. With my 4" kit Im sitting at something like 26". My hopes is to lose 2" to level and soften up by installing quality 2.5 lift springs. Then I can throw these dump truck springs from Prodookie in the scrap pile.

 

[BusaDave9]

Check out this thread: http://www.jeep-cj.com/forums/f19/how-tall-you-i-mean-really-13239/

 

[tjmons]

Working on setting up the rear suspension still and have a request. Could anybody running a 2.5" spring lift measure from the center of the rear axle/rim/wheel cap, whichever works, to the outer edge lip of the rear factory flare. With my 4" kit Im sitting at something like 26". My hopes is to lose 2" to level and soften up by installing quality 2.5 lift springs. Then I can throw these dump truck springs from Prodookie in the scrap pile.

I have a 2 1/2 inch lift with a 2 inch body lift and I am at 26 inch from your requested points. Running 35x12.50x15's

 

[thescot]

Thank You.