Question for the Experts Steering Issues from Body Lift.

Question for the Experts Steering Issues from Body Lift.

Canadian CJ 7

Active Jeeper
Posts
344
Media
11
Thanks
0
Location
British Columbia
Vehicle(s)
Current Setup 1985 Jeep CJ-258, 6cyl -T-5 5spd 273 gears.
I am in the process of installing a 1 inch (Poly) body lift to my CJ7 to replace my original cracked and worn out bushings. I currently have a 2.5 inch suspension lift on my jeep with no issues. Do you think I will having any steering issues as a result of installing the body lift? I am currently running 31x10.5 tires. Any suggestions if any before I go a head with installing the body lift.

Thanks Brian :)
 
The body lift will NOT change any of the steering geometry.
You will have to watch things like brake lines, fan shroud, steering shaft,
any cables and or wires and anything else thats going to get streched out.
1 inch isn't much, but go slow and keep an eye on everything.:chug:
 
1"? No problem! Go for it.
 
Thanks Old Dog & 73 CJ for your help. I couldn't find any Poly bushings that didn't have a 1 inch minumum lift. I didn't want to replace them with the stock rubber bushings that came with it when new. My kit came with all the bolts and washers which was another plus as well as being made of Poly. I thought I would run it by you guys before I started. Thanks again for your help

Cheers :chug:
Brian
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$25.00
This donation drive ends in
Back
Top Bottom