steering
cj7crawler
Jeeper
Hello Iam new to the cj and have an issue with my steering, it will not go to full lock in one direction. no strange noises and fluid is good? also the lower control arm is hitting my leafspring.
steering
- Thread starter cj7crawler
- Start date
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,248
- Media
- 360
- Resources
- 2
- Thanks
- 87
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
Steering stabilizer?
Loosen one end to see if that helps. If so tighten it in a location that won't restrict the steering.
Loosen one end to see if that helps. If so tighten it in a location that won't restrict the steering.
cj7crawler
Jeeper
I do not have a steering stabilizer
Old Dog
Always Off-Roading Jeeper
- Posts
- 13,886
- Media
- 82
- Thanks
- 5
- Location
- Stonelick Lake, Ohio
- Vehicle(s)
- 83 CJ7 350 tbi, TH350, D300 twin sticked & clocked, narrowed Chief D44 Eaton Elocker & Moser shafts, Explorer 8.8 Detroit locker, 410's, RE 4.5" spring lift 1" body lift, 35" Claws, cage tied to frame, Corbeau baja seats, HD tie rod and draglink, u-bolts flipped, custom skid plate and sliders, Warn 9.5ti winch with Amsteel synthetic line
You really need to fill out your info so we know what we are dealing with here.
cj7crawler
Jeeper
sorry about that got it done it is all stock accept for the 4"lift