Transfer case parking brake

[gert]

Well I finally got off my butt and finished the NV3550 conversion, it bolts up with a .250 spacer and uses the original flywheel and clutch. I also finished the Dana 300 rebuild with 4 to 1 gears and 32 spline outputs from JB Conversions with twins sticks. As an added bonus I also got the parking brake done. I used the universal kit from Tom Woods. I made a 3/16 adapter plate and it lines directly up

 

[BusaDave9]

Nice!
5 speed tranny
4 to 1 Tcase
Twin shift and a parking brake on the output shaft!

Who makes the parking brake kit?

 

[gert]

Tom woods makes the rotor and brake, I made the the adapter plate and cable out of 3/16 plate and the right rear parking brake cable from my CJ7 . http://www.4xshaft.com/.

 

[BajaEdition]

tom woods makes those or sources the parts from 71 and earlier jeeps which all had that system?

 

[gert]

I don't think so, from what I hear it is a cable actuated agricultural brake, the rotor is laser cut from 3/16 plate