60/40 split front seat

[spacejunkie]

Can anyone give me their opinion on this seat? Found one at a pic&pull. Would need to be recovered, but seems ok. Is it a rare thing to have? Anyone have one that would voice some feedback?
Thanks
Bill in SLC

 

[gert]

what did it come out of? do you have a pic?

 

[Kilo19]

Don't have the funny .gif but "this post is useless without pictures"

Oh and the sign is held up by women

 

[Petescj]

Can anyone give me their opinion on this seat? Found one at a pic&pull. Would need to be recovered, but seems ok. Is it a rare thing to have? Anyone have one that would voice some feedback?
Thanks
Bill in SLC

A 60 / 40 bench seat is rather rare. Grab it and save it at the least.

 

[ThisGuyUKnow]

Pics!

 

[spacejunkie]

these show a ratty old shredded seat cover on them, but otherwise, they seem ok. couldn't break loose the rusted bolts today, gonna try again with some pb blaster. they are in an 1980 CJ5 .

Bill in SLC

 

[spacejunkie]

got the drivers side seat out from the picknpull today. I'll have it re-covered and see about new foam. The passenger side couldn't be pulled as it was completly rusted through and the bolts couldn't be worked at all.
Bill in SLC

 

[Posi]

I've never seen a 60/40 bench seat in an 80's CJ5 . The seat brackets and skin look period correct. I would keep them!

I have a 60/40 bench seat in my 68 CJ5 , it also has a Ramsey PTO and the PTO shift is bent forward to accommodate for the bench seat.

 

[Peanut Butter]

got the drivers side seat out from the picknpull today. I'll have it re-covered and see about new foam. The passenger side couldn't be pulled as it was completly rusted through and the bolts couldn't be worked at all.
Bill in SLC

Cut the floor around the seat bolts. You really need the other half! Rod

 

[Petescj]

Cut the floor around the seat bolts. You really need the other half! Rod

x's a million or 2. Do what you must to get the other 40%

 

[0822]

x's a million or 2. Do what you must to get the other 40%

go and get it!!!

 

[spacejunkie]

how can I say no to those replies will be heading over tomorrow with a chisel and hammer. Don't really have and cutting tools.
Bill in SLC

 

[Petescj]

how can I say no to those replies will be heading over tomorrow with a chisel and hammer. Don't really have and cutting tools.
Bill in SLC

Thank you. A 60/40 bench seat is worthless without the /40.

 

[spacejunkie]

went back in the snow and rain today and got the passenger seat. unfortunately, the brackets/mounts were destroyed in the process. gonna have to look for replacements for them, should just be standard passenger seat mounts. any opinions?
thanks
Bill in SLC

 

[0822]

went back in the snow and rain today and got the passenger seat. unfortunately, the brackets/mounts were destroyed in the process. gonna have to look for replacements for them, should just be standard passenger seat mounts. any opinions?
thanks
Bill in SLC

 

[gert]

went back in the snow and rain today and got the passenger seat. unfortunately, the brackets/mounts were destroyed in the process. gonna have to look for replacements for them, should just be standard passenger seat mounts. any opinions?
thanks
Bill in SLC

looks like it could be standard brackets will need to see them to know for sure though…. Good job getting them out

 

[Petescj]

 

[Tdiggity]

BUMP!
I really want to get a set of these. I saw a set on ebay the other day front and rear with mounts in Virginia for $300. all shipping would have to be arranged by me. I checked and the quotes i got were over $300 for freight shipping. They are already gone. If anyone has a set or knows where to get one please Message me. Im new to the forum and new to jeeps but have a baby on the way so need the room for 5. Thanks Guys,
Taylor