72-75 Seat Mounting
73CJ
Crazy Sr. Respected Jeeper
- Posts
- 3,533
- Media
- 57
- Thanks
- 10
- Location
- Detroit Lakes, MN
- Vehicle(s)
- 73 CJ5 4.0 head on a 258, HEI, Holley Projection w/ 4.56, Detroit lockers Narrowed D44 front and full float D44 rear T14 w/ D20 4 wheel discs, 38.5 Boggers
Here's another idea for mounting your seats in a 72-75 CJ5 . Should work in others but may not be quite the same.
I used 1-1/4" x 1/8" wall tubing. The flats were 1-1/4" x 1/8". One piece tubing goes all the way across with a support in the center. I used the passenger side seat mount and used clevis pins to make it totally removable.
Full access to the compartment.
I've got slides on there from a 76 CJ5 . Not much adjustment, but better than none.
Seats are Mastercraft flat mounting.
I used 1-1/4" x 1/8" wall tubing. The flats were 1-1/4" x 1/8". One piece tubing goes all the way across with a support in the center. I used the passenger side seat mount and used clevis pins to make it totally removable.
Full access to the compartment.
I've got slides on there from a 76 CJ5 . Not much adjustment, but better than none.
Seats are Mastercraft flat mounting.
