Additional fan spacer??

[dual90s]

Hi all! Need some help please identifying this part. I recently took off my fan to get to the water pump and in addition to the 1 1/2 inch spacer, this was located behind the spacer in front of the pulley itself. Did a few searches on the internet (e.g Morris 4X4) and can't seem to find anything on it; stopped by O'Reilly's and they didn't have it. It is 1/4 inch thick.

 

[Lumpy Grits]

WELCOME!
Is that metal or plastic?
See if this is it--
https://www.flex-a-lite.com/accessories/belt-driven-fan-spacers.html

GOGGLE is your friend
LG

 

[dual90s]

Thanks Lumpy Grits! It's definitely metal (feels light, probably aluminum) and 1/4 thick with a 5/8" center hole. The other spacer is 1 1/2 inches. So total spacing would be 1 3/4 and I did find one of those on Amazon for $14, so I guess I'll go with that. I suspect one spacer instead of 2 won't matter, but I'm new to CJs (only owned it about a month now) and was just wondering if this even mattered or anyone has come across this before.

 

[Torxhead]

A 1/4" isn't much, so you might be fine with just an inch and a half spacing. You could just try it, but make sure the bolts aren't too long.