CJ7 Window Regulator
CJ7 Window Regulator
- Thread starter jchightower
- Start date
jeepboy45
Old Time Jeeper
- Posts
- 1,239
- Thanks
- 2
- Location
- Altamonte Springs, Florida
- Vehicle(s)
- 1979 CJ-7, Newly rebuilt AMC 360!, fully rebuilt GM TH400, Quadra-trac TC w/Milemarker 2x4 conversion, AMC mod 20 rear w/1 piece Moser axleshafts, mod 30 front w/tie rod flip and castor correction shims, 4 in lift, Centech complete wiring harness, dual electric fans on 3 core aluminum radiator, tilt steering wheel, 20 gal poly gas tank, new J20 steering box, MSD 6A ignition combined with TeamRush distributor mods
I would try Morris 4 x 4...
They have a great website with simple, easy to use diagrams with corresponding parts to purchase..
Prices seem to be good too ...
They have a great website with simple, easy to use diagrams with corresponding parts to purchase..
Prices seem to be good too ...
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,247
- Media
- 360
- Resources
- 2
- Thanks
- 86
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
I know a YJ door would fit on a CJ but I don't know if a YJ door parts would fit in a CJ door. Elwood had some threads on this. Maybe he will chime in.
http://www.jeep-cj.com/forums/f99/cj7-cj8-factory-steel-doors-3926/
http://www.jeep-cj.com/forums/f99/differences-between-cj7-yj-hardtop-3539/
http://www.jeep-cj.com/forums/f99/cj7-cj8-factory-steel-doors-3926/
http://www.jeep-cj.com/forums/f99/differences-between-cj7-yj-hardtop-3539/