Come and get your STICKERS!!!
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Come and get your STICKERS!!!
- Thread starter elwood blues
- Start date Start date:
- Last post Last post:
Old Dog
Always Off-Roading Jeeper
- Posts
- 13,880
- Media
- 82
- Thanks
- 5
- Location
- Stonelick Lake, Ohio
- Vehicle(s)
- 83 CJ7 350 tbi, TH350, D300 twin sticked & clocked, narrowed Chief D44 Eaton Elocker & Moser shafts, Explorer 8.8 Detroit locker, 410's, RE 4.5" spring lift 1" body lift, 35" Claws, cage tied to frame, Corbeau baja seats, HD tie rod and draglink, u-bolts flipped, custom skid plate and sliders, Warn 9.5ti winch with Amsteel synthetic line
:ty: Got mine today. 
Jet
Active Jeeper
The Pony Express arrives!
:rock: 
:bounce:
I'm not sure i deserve the stickers,since i forgot to stamp the envelope
But :ty:. Now, where to put it on my Jeep?
Where's everyone else sticking them?
:rock: :bounce:I'm not sure i deserve the stickers,since i forgot to stamp the envelope
But :ty:. Now, where to put it on my Jeep?
Where's everyone else sticking them?
Cheepjeep85
Crazy Sr. Respected Jeeper
- Posts
- 4,934
- Media
- 57
- Thanks
- 0
- Location
- Chickamauga, Ga
- Vehicle(s)
- 1985 Jeep CJ7, 258, t-176, D300, AMC20, D30
lookin good (minus my crappy paint job)
:ty:
:ty:
Jet
Active Jeeper
I just had to exercise my artistic talent.
Send me yours,& i'll do the same for free. 
GPER
Jeeper
The stickers are just too cool, I'll get the winter grime off of the old girl ans she will be sporting the new swag.
Thank you.
Thank you.
ken98k
Senior Jeeper
- Posts
- 807
- Media
- 5
- Thanks
- 0
- Location
- North Pole, Alaska
- Vehicle(s)
- {1980 cj-5, 258, t-176, d300 amc20 rear, D30}{1974 cj-5, 304, T-15, D20, D30 front, D44 rear}{1973 cj-5, 304, t-98,D20, amc20, D30}
{1990 yj 2.5L i-4 AX-5 NP231 Dana 30 front Dana 35c rear}
1996 XJ Cherokee 4.0 HO
{2000 silverado}
{1979 Cadillac Sedan DeVille}
Got them yesterday, Thank You.
CJ007
Old Time Jeeper
- Posts
- 1,351
- Media
- 75
- Thanks
- 0
- Location
- Peoria, AZ
- Vehicle(s)
- 83' CJ7-35's, granny T18, clocked, locked, 456s, D30 20 trussed- stitched-heim traction-1 piece shafts, CV dshaft, quick discos, xtended shock mounts, SOA, revolvers rear, braided lines, herculined, hand throttle, AMC saddle bags, rebuilt 258, D300.
Thanks, been sick and busy but figured I would post a pic.
CJ
Admin
- Posts
- 23,318
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 49
- Thanks
- 849
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
New news...
I have found a local company that will get us (Jeep-CJ.com) going for new round stickers and rectangular bumper stickers. They can (will) create multi color ones if that is what we want.
The stickers we had made are great (thanks Elwood!), but I was considering a change.
Give us some ideas and drawings if you can...
And BTW - once I get these new ones made - all stickers will be FREE for the asking (well they were before but I will pay postage this time)...
Just want to say thanks to all that keep this site going!
I have found a local company that will get us (Jeep-CJ.com) going for new round stickers and rectangular bumper stickers. They can (will) create multi color ones if that is what we want.
The stickers we had made are great (thanks Elwood!), but I was considering a change.
Give us some ideas and drawings if you can...
And BTW - once I get these new ones made - all stickers will be FREE for the asking (well they were before but I will pay postage this time)...
Just want to say thanks to all that keep this site going!
Muddog
Jeeper
Now, if I only had this design on a spare tire cover.
anybody know anything about silk screen??
go to a local print shop and see what they can do. i know a compony here that can do it but i am moving and dont have the time to look into it
GoldenEagle36
Senior Jeeper
- Posts
- 681
- Media
- 54
- Thanks
- 0
- Location
- SW Pennsylvania
- Vehicle(s)
- 1977 cj7 Golden Eagle 304,automatic, Quadra-trac, full restoration just "finished." 4 inch superlift, lift shackles in the front, sitting on some KM2 Mud terrians
1999 tj 4 cylinder ax5 trans 3 inches lift 31s
1956 Dj3a all original except axles and engine, Hurricane 4 cyl. 4x4 conversion, 27,500 original miles 58 Jeep-A-Trench cj5 8000 miles.
Count me in!!! Those look awesome ill take one the way they are now:d!!!
Cheepjeep85
Crazy Sr. Respected Jeeper
- Posts
- 4,934
- Media
- 57
- Thanks
- 0
- Location
- Chickamauga, Ga
- Vehicle(s)
- 1985 Jeep CJ7, 258, t-176, D300, AMC20, D30
Ah very cool. Ill throw my op in the mix, I liked the cartoony design from the last go round, and/or a plain jeep-cj font sticker in rectangular bumper sticker style or just lettering. thank you cj
Droooiiddd 2
Droooiiddd 2
GoldenEagle36
Senior Jeeper
- Posts
- 681
- Media
- 54
- Thanks
- 0
- Location
- SW Pennsylvania
- Vehicle(s)
- 1977 cj7 Golden Eagle 304,automatic, Quadra-trac, full restoration just "finished." 4 inch superlift, lift shackles in the front, sitting on some KM2 Mud terrians
1999 tj 4 cylinder ax5 trans 3 inches lift 31s
1956 Dj3a all original except axles and engine, Hurricane 4 cyl. 4x4 conversion, 27,500 original miles 58 Jeep-A-Trench cj5 8000 miles.
id love to have a front license plate for both my tj and cj
CJ
Admin
- Posts
- 23,318
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 49
- Thanks
- 849
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
That is whom I am dealing with.
Now, stop pming Elwood, if you want stickers pm me.
When I run out I will start on the new batch.
CJ
Admin
- Posts
- 23,318
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 49
- Thanks
- 849
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
id love to have a front license plate for both my tj and cj
The company I am working with can create one offs.
GoldenEagle36
Senior Jeeper
- Posts
- 681
- Media
- 54
- Thanks
- 0
- Location
- SW Pennsylvania
- Vehicle(s)
- 1977 cj7 Golden Eagle 304,automatic, Quadra-trac, full restoration just "finished." 4 inch superlift, lift shackles in the front, sitting on some KM2 Mud terrians
1999 tj 4 cylinder ax5 trans 3 inches lift 31s
1956 Dj3a all original except axles and engine, Hurricane 4 cyl. 4x4 conversion, 27,500 original miles 58 Jeep-A-Trench cj5 8000 miles.
CJ
Admin
- Posts
- 23,318
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 49
- Thanks
- 849
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
I'll try and send out the stickers I have this week. The shop I am working with has done a good job of prototyping the slight changes I want and I hope to have a finalized design soon.
kenpoman2003
Jeeper
- Posts
- 57
- Media
- 1
- Thanks
- 0
- Location
- Whitefield, Me
- Vehicle(s)
- 1986 cj7 4" suspension lift, 2" body left. am going to install rear bumper tire carrier, front bumper brush and grill guard, front roll cage and tie in kits. all as money becomes available. dana 30 front end with quadraqtrac four wheel differential. amc 20 locking differentail in the rear. Have solid piece axels just waiting to be installed some slow winters day hopefully in heated garage. Am also going to do, do it yourself paint in tub liner havent decided which one to go with. Any sugestions? hope to do this to the underbody and frame as money allows. I have ordered marine interrior lights for under dash and bach passenger compartment and under hood w/ heavy duty toggle switches. I plan to install a secondary fuse block to acommidate any accessories I may someday get. I know it sounds like a lot but its a pick away project with no deadline. and as money provides.
pm sent thanks also need where to make donation