Build Thread Finorman build
Jimbos76cj
Full Time Jeeper
- Posts
- 2,223
- Featured
- 1
- Thanks
- 1
- Location
- St.Cloud FL
- Vehicle(s)
- 83 CJ-7.. 4" YJ springs front rear, J-10 44 front/AMC 20 rear,6 cy auto dana 300 35' bfg Done and gone!!
Ask me about my head light upgrade harness!!!
Good day.. been a while since Ive had a CJ project to show off so heres what Im newly working on. The project actually belongs to another member here Finorman. Helping him get back together.
Since its the first pic up in photo bucket is the rad well start there. Its getting a taurus 2 speed fan set up.
Here it is prior to making the brackets
If any one wants more info on making the brackets I took a few pics while doing em.. let me know if your interested in them.
On to motor pics
Since its running a set of electric gauges, tbi and electric fans I was worried about the wiring getting out of hand. I made a bracket to keep it clean on the motor.
Since it has a YJ tub it only made sense to cover it to a hydraulic clutch.
Heres the bracket and slave on the 176 bell housing
All the run and gauge wires are in and complete in the engine bay. I still need to add a few things to the main harness and loom it.
Heres some teaser dash/gauge shots
The gauge directions wanted all the under dash connections to be made with butt connectors.. I wasn't having any of that nonsense.
thats all i got for now.. Ill add more as it gets done. Please ask away.
Since its the first pic up in photo bucket is the rad well start there. Its getting a taurus 2 speed fan set up.
Here it is prior to making the brackets
If any one wants more info on making the brackets I took a few pics while doing em.. let me know if your interested in them.
On to motor pics
Since its running a set of electric gauges, tbi and electric fans I was worried about the wiring getting out of hand. I made a bracket to keep it clean on the motor.
Since it has a YJ tub it only made sense to cover it to a hydraulic clutch.
Heres the bracket and slave on the 176 bell housing
All the run and gauge wires are in and complete in the engine bay. I still need to add a few things to the main harness and loom it.
Heres some teaser dash/gauge shots
The gauge directions wanted all the under dash connections to be made with butt connectors.. I wasn't having any of that nonsense.
thats all i got for now.. Ill add more as it gets done. Please ask away.
