Fuel Return & Vent Lines
Neuner
Old Time Jeeper
Have steel fuel return and vent lines extending to the front. PO plugged one of the lines. They had a single input/out fuel filter and I installed a Holley pressure regulator so never needed it until now. The other was connected to a canister which I hope is the vent.
I'm needing to use the return line now and I'm not confident he had it correct since I've also found other PO mistakes.
I've traced the two back and they disappear back to the tank in the same location. I really don't want to have to drop the tank to get my answer. I need to save that for some other time to keep the family happy.
The line that was plugged appears to be thinner, 5/16(?) than the vent line, 3/8"(?). Looks original and un-molested. Is this correct?
I'm needing to use the return line now and I'm not confident he had it correct since I've also found other PO mistakes.
I've traced the two back and they disappear back to the tank in the same location. I really don't want to have to drop the tank to get my answer. I need to save that for some other time to keep the family happy.
The line that was plugged appears to be thinner, 5/16(?) than the vent line, 3/8"(?). Looks original and un-molested. Is this correct?
Last edited: