Sorry Jamie, I dug them out a couple weeks ago to get started on it, but it turns out that with my 4" suspension lift my lower mounts won't work anymore, and I'll have to make new ones now. But I gotta say, it has to be one of the simplest set ups I've ever seen. Do you have any of the brackets, or are you looking to build your own? I can at least lay them all out and take pics and measurements for you, if you'd like..
And as far as putting one on a CJ goes, I don't see the big deal... with all the other stupid plow setups I've seen people install on anything that has any type of 4x4 or all wheel drive system, I've gotta say that a CJ frame can handle the abuse far better any newer, short, small vehicle I've seen with plows, probably even better than say, an S-10 type platform. Now, I would not go driving down a highway at 60 mph with my blade on my CJ, that extra weight and short wheel base may not be a good combo for highway speeds, and my experience would dictate a similar amount of weight be added and secured into the bed of the Jeep, if you were to do so. Common sense plays a big part. They have been making snow plows for CJs since CJs were born, so if it's a bad idea then Willys and Jeep have been making bad ideas and selling them with their vehicles for a very long time. Plow on, my friend..
