Need seal number and brand for Dana 44 rear axle
jonboy1919
Active Jeeper
- Posts
- 269
- Media
- 49
- Thanks
- 0
- Location
- Maltby, WA
- Vehicle(s)
- 1979 CJ7 Renegade, 304cid, MC 2150 Carb, TH400 tranny, Dana 300 twin stick, Dana 44 front w/lock right, Dana 44 rear w/truetrack locker, 33x12.5 Goodrich's, Warn 8k, onboard air, Motorcraft TFI ignition upgrade, WipeBoy wiper upgrade, Painless wiring harness, backup lamps, Driving lamps, YJ brake booster and MC upgrade swap, Rear tow hitch
I got a '79 CJ7 with Dana 44s both front and rear. Upon 1st inspection after purchase, I found the driver's side rear wheel seal was leaking onto the brake shoes.
Pulling the axle proved easy, but removing the bad seal was tough and any number on the old seal was disfigured and unreadable.
Anyone out there know what seal brand and number I need for replacement? The local NAPA Jeep expert was left scratching his head as to what I needed.
Any help is appreciated.
Pulling the axle proved easy, but removing the bad seal was tough and any number on the old seal was disfigured and unreadable.
Anyone out there know what seal brand and number I need for replacement? The local NAPA Jeep expert was left scratching his head as to what I needed.
Any help is appreciated.