Need some review on my wiring schematic
jmoreau002
Jeeper
I new here and I believe this is my first post. Im trying to restore an ole 55 CJ5 . It was a rust bucket when I picked it up and many of the ancillary components were trashed or missing out right. I've begun to collect all the components and plan out the wiring. Attached is a spreadsheet that I compiled for myself.
Im stuck on a few circuits and am having some trouble following some of the old schematics in the Haynes manual. Specifically:
Thanks guys.
Im stuck on a few circuits and am having some trouble following some of the old schematics in the Haynes manual. Specifically:
- The externally mounted starter solenoid has 2 small terminals. I know one of them is connected to key witch START terminal to open the current to the starter, but where does the other go?
- Does my planned Dummy Light wiring appear correct?
- The key switch itself has 4 positions: Key in. Left to ACC, Key in to OFF, Key in Right to IGN, and spring return START. Likewise on the back of the switch, I have BATT, IGN, ACC, START. Are my current connections correct on here?
- Anything else that you see, please let me know.
Thanks guys.
