Build Thread Pete's Virginia Farm Find
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Build Thread Pete's Virginia Farm Find
- Thread starter Petescj
- Start date Start date:
- Last post Last post:
Hi pete, newbie here and thanks for sharing. Missing my fam bc of this
Well I don't want you missing your family over my Cj but I appreciate the comment. Honestly this Cj has been pretty good to me in a time I've needed a little lower maintenance Jeep. Yes I've had to do some upkeep since my last post but I'm almost at a point where I'm ready to be a more active member of the site again. More on that a bit later. Let's just say my health is improving but I still need a little more time.
Belizean
Always Off-Roading Jeeper
- Posts
- 6,916
- Featured
- 1
- Media
- 20
- Solutions
- 3
- Thanks
- 717
- Location
- New Orleans area
- Vehicle(s)
- 84 CJ7 4 banger-owned since new in 1984 bought off truck at dealership - rebuilding 258, T176 with Sniper EFI D300 4:1 Lomax gears Twin Sticked 1 piece axels with locker
Good to hear you are back in the game again !
- Posts
- 7,316
- Media
- 5
- Solutions
- 1
- Thanks
- 157
- Location
- Roanoke, Va
- Vehicle(s)
- '80 CJ-7, AMC 304, T177, Dana 300, Widetrack axles (D30 & AMC20) w/ 3.73 gearing, MSD ignition,
- Posts
- 5,829
- Media
- 186
- Resources
- 1
- Thanks
- 74
- Location
- Plumas Lake, CA, USA
- Vehicle(s)
- 1974 CJ5 ~ Fresh built AMC 360 - SM420 - D20 - D30F with upgraded 30 spline shafts and knuckles & D44R - 4.27 Gears - ARB Lockers F/R - All chrome molly axles - on 33's - YJ 4" Lift Spring Conversion
Pete - Rubicon Trail ride 2020. Get ready! lol
Good to hear from you bud!
Good to hear from you bud!
- Posts
- 5,829
- Media
- 186
- Resources
- 1
- Thanks
- 74
- Location
- Plumas Lake, CA, USA
- Vehicle(s)
- 1974 CJ5 ~ Fresh built AMC 360 - SM420 - D20 - D30F with upgraded 30 spline shafts and knuckles & D44R - 4.27 Gears - ARB Lockers F/R - All chrome molly axles - on 33's - YJ 4" Lift Spring Conversion
Where did that picture go? Was a nice Jeep there Pete!
I was trying to find a new place to host my photos cause Photobucket blows. Tried uploading to the gallery here but my files are too large and I can't remember how I used to do it. I was going to update the things I've done to the Cj but need pics with it. 
- Posts
- 7,316
- Media
- 5
- Solutions
- 1
- Thanks
- 157
- Location
- Roanoke, Va
- Vehicle(s)
- '80 CJ-7, AMC 304, T177, Dana 300, Widetrack axles (D30 & AMC20) w/ 3.73 gearing, MSD ignition,
Mine are uploaded thru Tapatalk or Imgur.....
I noticed a bunch of mine are missing at the first part of my build - hafta work in that one of these days....
Sent from my iPhone using Tapatalk
I noticed a bunch of mine are missing at the first part of my build - hafta work in that one of these days....
Sent from my iPhone using Tapatalk
Ok trying this with Tapatalk now. Haven't updated this thread in a while. The windshield frame I got with the Cj was thinner gauge than the original and the wiper pivots tore it up. I got a better replacement one and painted it with some paint I had laying around. I'll color match it better when the nicer weather comes around.
Sent from my moto g(7) power using Tapatalk
I also put a new Luk clutch in over the Summer. While I had the Transmission out I gave everything a thorough cleaning and painted the Dana 300 . I wish I would've gotten a before pic of the Transmission . It was solid black and between it and the Transfer Case I spent a whole weekend just cleaning. Turned out nice though
Sent from my moto g(7) power using Tapatalk
Sent from my moto g(7) power using Tapatalk
Unfortunately the AMC 258 i6 / 4.2l in the Cj is running no higher than 20 psi oil pressure so I'd been looking for a replacement. I was looking for a 360 but didn't have much luck. Then a came about a Yj AMC 258 i6 / 4.2l . I got to hear it run , oil pressure was at a beautiful 60 psi and a compression check found all 6 cylinders above 125. It doesn't look too pretty right now but I'll clean it up regasket and repaint.
Sent from my moto g(7) power using Tapatalk
Sent from my moto g(7) power using Tapatalk
- Posts
- 5,829
- Media
- 186
- Resources
- 1
- Thanks
- 74
- Location
- Plumas Lake, CA, USA
- Vehicle(s)
- 1974 CJ5 ~ Fresh built AMC 360 - SM420 - D20 - D30F with upgraded 30 spline shafts and knuckles & D44R - 4.27 Gears - ARB Lockers F/R - All chrome molly axles - on 33's - YJ 4" Lift Spring Conversion
Nice Pete - good to see the progress bud!
mdeluca
Full Time Jeeper
I reinforced my wiper frame pivot openings and haven't had a problem in a year and a half so far...
https://www.jeep-cj.com/forums/f98/mikes-1986-cj7-mid-year-rebuild-27149/index15.html#post245708
I did use your thread to fix mine and it worked for a little over a year. What I should have also done was get new pivots. Mine weren't as smooth as they should've been and I never lubed the pivot points. The wipers were always a bit raggedy and noisy and I wrote it off as a Jeep thing. They wound up binding again and bending all the linkage up and shearing of the keyways on the pivots. Then I got some Crown linkage that lasted about 2 months. Your fix was also more precise than mine and that didn't help either. But hey thanks for helping me keep them running for an extra Year and a Half or so.
These next few months are all about parts gathering. My mechanic who does my yearly inspection said I need to fix the rust issues my Cj has before my next inspection. Scored some replacement corner sheet metal today for $50. The real deal was a rust free hardtop lift gate for another $75. Can't grab a pic off Facebook of the lift gate but it's nice.
Every year for the last 5 years my step son and I dabble in some fantasy football. This year it's paying off. We're in the championship game next week and if we win I'll be grabbing some new front fenders as well. It'll be nice not to have to put in a bunch of OT for Jeep parts for once
Sent from my moto g(7) power using Tapatalk
Every year for the last 5 years my step son and I dabble in some fantasy football. This year it's paying off. We're in the championship game next week and if we win I'll be grabbing some new front fenders as well. It'll be nice not to have to put in a bunch of OT for Jeep parts for once
Sent from my moto g(7) power using Tapatalk
Last edited:
Well finally broke down and put the hardtop on. Merry Christmas everyone.
Sent from my moto g(7) power using Tapatalk
Sent from my moto g(7) power using Tapatalk
Well here's my East Coast Unicorn. A rust free lift gate for $75. What a interesting trip to pick it up in New Jersey. Using GPS but have never gotten sound out of my phone when using it. Always had Vicki with till today so it wasn't a big deal.
Long story short I miss a turn and end up lost in a Spanish speaking area with the gas light on in my step sons Eclipse. I finally pull the car in the gas station I find sputtering almost outta fuel. Dumb me finally figured out my volume on the phone is off. [emoji23] Now I'm 1/2 hour past where I was supposed to be so I end up an hour late. Still happy to pick it up and I can actually hear the GPS so all is well.
That's when the blue lights flash behind me. Seems I hit a road that has a one block area that's 25 and I was doing 41. [emoji2959] The officer was awesome though and left me off with a warning. Quite eventful to say the least.
I'll clean it up and paint it tomorrow and show you why I needed it to begin with.
Sent from my moto g(7) power using Tapatalk
Long story short I miss a turn and end up lost in a Spanish speaking area with the gas light on in my step sons Eclipse. I finally pull the car in the gas station I find sputtering almost outta fuel. Dumb me finally figured out my volume on the phone is off. [emoji23] Now I'm 1/2 hour past where I was supposed to be so I end up an hour late. Still happy to pick it up and I can actually hear the GPS so all is well.
That's when the blue lights flash behind me. Seems I hit a road that has a one block area that's 25 and I was doing 41. [emoji2959] The officer was awesome though and left me off with a warning. Quite eventful to say the least.
I'll clean it up and paint it tomorrow and show you why I needed it to begin with.
Sent from my moto g(7) power using Tapatalk
- Posts
- 7,316
- Media
- 5
- Solutions
- 1
- Thanks
- 157
- Location
- Roanoke, Va
- Vehicle(s)
- '80 CJ-7, AMC 304, T177, Dana 300, Widetrack axles (D30 & AMC20) w/ 3.73 gearing, MSD ignition,
Nice score!! Glade it didn't come with a "surcharge"!!
Please use this link to purchase an annual memberships. The site's survival depends on it... https://www.jeep-cj.com/forums/payments.php
Please use this link to purchase an annual memberships. The site's survival depends on it... https://www.jeep-cj.com/forums/payments.php
Well we lost our Fantasy football championship game but I've been working 3-3s for awhile so I ordered some new fenders anyway. Should be here by mid week. I only have 4 days off this month but this weekend was two of them. Can't complain when 2 days off in January are in the low 60s. Here's my junk lift gate that kind of kept the weather out
Sent from my moto g(7) power using Tapatalk
Sent from my moto g(7) power using Tapatalk
With weather like that I could open the garage door and paint the new lift gate to match the hard top. Now I have access to the rear again since I can open and close this one. Looks and seals much better. It does have a little ding at the handle I'll address a little later.
Sent from my moto g(7) power using Tapatalk
Sent from my moto g(7) power using Tapatalk
Similar threads
Build Thread
1973 CJ5 Build for all around use.
Build Thread
'74 CJ5 frame off build
