power steering conversion
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
power steering conversion
- Thread starter stevemichele
- Start date Start date:
- Last post Last post:
Hedgehog
Always Off-Roading Jeeper
- Posts
- 9,370
- Thanks
- 4
- Location
- Tucson/Marana Arizona
- Vehicle(s)
- -1975 Jeep CJ5, 360 V8, Headers, Duel Exhaust,T15 transmission, D-20 Transfer case, Twin Stick Conversion, Warn 8274 Winch
-1951 Willys Wagon, 4 cylinder, "F" head, little rust, very close to stock
You will need a hydraulic pump and brackets for an AMC straight 6, pressure and return hoses, a power steering gear box, and a power steering shaft, the lower coupling is different for power steering. I have no idea if the gear box bracket is the same or not.
CJ
Admin
- Posts
- 23,235
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 48
- Thanks
- 840
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
Take a look at this. -->> https://jeep-cj.com/community/resources/manual-to-power-steering-conversion.14/
IOPort51
NOT the voice of reason Jeep-CJ.com
- Posts
- 13,956
- Featured
- 5
- Media
- 458
- Thanks
- 12
- Location
- Garland Texas
- Vehicle(s)
- 1977 cj-5
4.2 W/MC2100 carb, 4.0 head W/3 angle valves,SS Header,TFI ignition with MSB-6 offroad module,CS144 140 amp RPS alternator with remote regulator T-150,d-20,Dana 44 with OX lock and disk brakes. D-30 with Spartin locker,
skyjacker 2.5 lift?nitro shocks,31" BFG A/T off road.8000 lb Warn winch, original owner.=^)
2006 Toyota Tacoma
That is a great tech write up and I wish I had found it before I did my change over. I would add that I could not find the bell joint to fit the gear box shaft and used a U-joint from Flaming river. 