Rear axle advice

[Scout1067]

I am fixing to pull the trigger on new one piece rear axles for my AMC20 . Igot the wife to agree to it[emoji16].

What do I need to measure to ensure I order the correct axles? I am looking at going with the Moser CJ-S one piece kit because I think that is the one I need.

Sent from my SM-A405FN using Tapatalk

 

[oss]

With Moser axles all you have the information you really need, is whether it's wide trac or narrow trac. The instructions should have all the information you need.

 

[RiverandSand]

Unless your axle had been swapped, 81 would be narrow track. Can't go wrong with Moser axles.

 

[Scout1067]

I think it still has the stock axle. I talked to the guy that had it before me and he bought it used in 86, as far as he knows it's still original. I think I am going to order the Moser's today.

Sent from my SM-A405FN using Tapatalk

 

[Mrpeter63]

I maybe wrong but i do believe TracLok axles are different(shorter). Easy to tell if you have a TracLok rear, On the flat spot to the left of the Diff cover there will be a letter/letters stamped in it. Like A or AA, a double letter would be a TracLok rear... I used Ten Factory axles and I'm pretty sure when i did mine, in the directions it said, These will not work with a TracLok diff and you had to special order those axles...

 

[007]

FWIW, I have an AMC20 and went to a fresh TracLoc and did not need to change axles.

Measure WMS to WMS and you'll know if you have a narrow or wide track. Pretty sure 81 was split wasn't it?

 

[Scout1067]

I ordered the Moser's yesterday so I will know in a few weeks if they right or not. Takes about two weeks for parts from the States to get to APO addresses here in Germany.

Sent from my SM-A405FN using Tapatalk