rear seat belt bolt down location
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
rear seat belt bolt down location
- Thread starter ksouthw80
- Start date Start date:
- Last post Last post:
- Posts
- 11,552
- Media
- 57
- Thanks
- 11
- Location
- Frederick colorado
- Vehicle(s)
- 84 cj7, 91 cherokee, 78 chevy 3500 pu, 78 CJ7
They bolt to the seat frame
hdgapeach
Old Time Jeeper
- Posts
- 1,054
- Thanks
- 2
- Location
- Franklin, GA
- Vehicle(s)
- Right now, only one '76 CJ5. 304 with a three speed stick. Everything else is pretty much stock 'cept for a 4" suspension lift. Came to me with a back breakin' 4" suspension lift attached to a reverse shackle setup (Reversed the reverse shackle :dung: and now she rides like a Caddy!) Also posess a few 60s & 70s Mustangs and a couple of late 70's F150s 4X4s.
caveman
Full Time Jeeper
- Posts
- 1,700
- Solutions
- 1
- Thanks
- 64
- Location
- Central Maine
- Vehicle(s)
- 88 YJ with a CJ nose, 4.7 Stroker, AW4 transmission, Dana 35 HP front Ford 8.8 rear
Every one that i've seen with the solid back seat hooks the belts to the seat frame and the fold and tumble seats have them hooked to the floor.
hdgapeach
Old Time Jeeper
- Posts
- 1,054
- Thanks
- 2
- Location
- Franklin, GA
- Vehicle(s)
- Right now, only one '76 CJ5. 304 with a three speed stick. Everything else is pretty much stock 'cept for a 4" suspension lift. Came to me with a back breakin' 4" suspension lift attached to a reverse shackle setup (Reversed the reverse shackle :dung: and now she rides like a Caddy!) Also posess a few 60s & 70s Mustangs and a couple of late 70's F150s 4X4s.
Got it.
I do have the fold and tumble rear seat. Makes sense to me.
I do have the fold and tumble rear seat. Makes sense to me.
Torxhead
Always Off-Roading Jeeper
My '86 came with the fold and tumble seat with the (3) 7/16-20 threaded holes for the seat belts plus the 8 other threaded holes for the rear seat. It was removed to store tools and spare parts, and other types of gear.
caveman
Full Time Jeeper
- Posts
- 1,700
- Solutions
- 1
- Thanks
- 64
- Location
- Central Maine
- Vehicle(s)
- 88 YJ with a CJ nose, 4.7 Stroker, AW4 transmission, Dana 35 HP front Ford 8.8 rear
My mind fails me at times. The two outer seat belt bolts are on the inner fender well. The center one is on the floor.
Similar threads
- Solved
