Shifter Boot for Fourwheel shifter?

Shifter Boot for Fourwheel shifter?

cbcustoms

Jeeper
Posts
11
Thanks
0
Location
Oklahoma City
Vehicle(s)
1973 International Harvester Truck 392cid 4x4,
1977 CJ7 304cid,Auto 4x4 stock,
1982 SSP Mustang 331cid,60mm turbonetics Turbo,
2001 F150,
I need an Idea to put a boot on this hole and thought i would see if anyone had fixed this before and if you have seen any boots ... Thanks

1977 CJ AMC 304 auto
 
Go to a parts store and look at their cv boots, the look great too.

Or what I love doing is walking around junk yards and seeing what's there to pick, there'll be plenty of shifter boots to select at a good yard.
 
Is there some reason an OEM boot wouldn't work? Use 54cj3b's link to find one at Quadratec.
The PO put a body lift on my CJ5 . Then I installed a twin stick. My shift levers had too much movement to mount a boot in the usual way so I had to make this:
twin_shift_close_up__small.jpg

 
Thanks for the ideas I used a clutch fork dust boot off a 72 Challanger. ten dollars and it looks good.
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a donation.

Help support Jeep-CJ.com by making a donation.
Goal
$200.00
Earned
$0.00
This donation drive ends in
Back
Top Bottom