spare fuel tank sending unit
jeepboy45
Old Time Jeeper
- Posts
- 1,239
- Thanks
- 2
- Location
- Altamonte Springs, Florida
- Vehicle(s)
- 1979 CJ-7, Newly rebuilt AMC 360!, fully rebuilt GM TH400, Quadra-trac TC w/Milemarker 2x4 conversion, AMC mod 20 rear w/1 piece Moser axleshafts, mod 30 front w/tie rod flip and castor correction shims, 4 in lift, Centech complete wiring harness, dual electric fans on 3 core aluminum radiator, tilt steering wheel, 20 gal poly gas tank, new J20 steering box, MSD 6A ignition combined with TeamRush distributor mods
Hey guys...
I posted this question at the tail end of another thread but I figured I'd post it in its own thread.
Does anyone have a spare sending unit from a 1985 poly 20 gallon fuel tank. I dont actually want your spare sender, I was hoping to get some good meaurements off it. I'd hate to drop my tank just to measure my sending unit.
Any help would be appreciated..
thanks in advance
Brian
I posted this question at the tail end of another thread but I figured I'd post it in its own thread.
Does anyone have a spare sending unit from a 1985 poly 20 gallon fuel tank. I dont actually want your spare sender, I was hoping to get some good meaurements off it. I'd hate to drop my tank just to measure my sending unit.
Any help would be appreciated..
thanks in advance
Brian