Speedometer removal
cdlongjr
Active Jeeper
- Posts
- 433
- Media
- 14
- Thanks
- 0
- Location
- Newark, De
- Vehicle(s)
- 1983 Jeep CJ-5, 1987 Wrangler YJ, 1974 J-10
Ok guys, how do I remove the speedo to repair the water temp & fuel gauges?
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Speedometer removal
- Thread starter cdlongjr
- Start date Start date:
- Last post Last post:
mylittlecj5
RIP Mike, we'll all miss you
unscrew the speedo cable, remove the light sockets, disconnect guage wiring and remove 4 nuts off the studs welded to the back face.
cdlongjr
Active Jeeper
- Posts
- 433
- Media
- 14
- Thanks
- 0
- Location
- Newark, De
- Vehicle(s)
- 1983 Jeep CJ-5, 1987 Wrangler YJ, 1974 J-10
Thank you sir.
certifiablejeep
certifiablejeep.com
Well, you described how to get the speedo out... to replace the gaugues, you have to bend 4 tabs on the chrome cover, take that off, then the glass, then the speedo face comes apart and then you are staring at the gauges... you must get the correct gauges that were in there... there are different ones if I remember.
1 type is all round and the other type is kind of trapezoidal... get the right ones...
cb
1 type is all round and the other type is kind of trapezoidal... get the right ones...
cb
mylittlecj5
RIP Mike, we'll all miss you
CJ
Admin
- Posts
- 23,244
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 48
- Thanks
- 840
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
LOL - That is the difference between pre and post... I bet he needed both answers in the end... 
certifiablejeep
certifiablejeep.com
But thats what he asked for...
He asked how to repair the gauges, getting the speedo out is the easy part...
cb
mylittlecj5
RIP Mike, we'll all miss you
CJ
Admin
- Posts
- 23,244
- Featured
- 5
- Media
- 881
- Resources
- 193
- Solutions
- 48
- Thanks
- 840
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
Come on... Does it really matter? All the information needed and asked for - and more was supplied... That's what really counts!
All the information needed and asked for - and more was supplied... That's what really counts! 
jeeper1
Jeeper
- Posts
- 93
- Thanks
- 0
- Location
- crystal springs,ms
- Vehicle(s)
- 1975 cj-5,stock with 2'' lift. 304 engine with headers,motocraft 2100 2 bl carb,3 speed trans,
104.00 where can I get one.mine works fairly well but could really use an up grade.is the whole cluster or individual gages,plus speedo.i could probably find some on my own but always could use a little help sometimes.thanks!