Splined column swap out to DD need aftermarket brands and prices please
76cj7chick
Old Time Jeeper
- Posts
- 1,235
- Solutions
- 1
- Thanks
- 8
- Location
- WA
- Vehicle(s)
- 1976 CJ7 Jeep with a engine/tranny/wiring harness out of a 1988 s10 blazer 4.3l v6 with th700r4 automatic tranny and a cj7 Dana 300 transfer case with Novak adapter.
Complete wiring harness from the s10 blazer. Painted with HOT PINK Pearl paint with standard sized metallic halographic pink flakes. Painted by me -a newb. New rear, front and side three wire LED lights, New parts, new custom dash-by me And a lot of guidance from fellow jeepers and lots of prayers etc.... :p
I did some research and found a few different column mounts/brackets by different companies.
Would someone chime in and let me know what they used (or a friend or someone they knew)?
Of all the mounts im leaning towards the Summit mount. But don't know if I will need one with a drop.
Or I may be interested in the flaming river mount. But don't know if it will work with my CJ7 bracket. I sent an email to FR and they said it is a universal mount so it may work.
Would someone chime in and let me know what they used (or a friend or someone they knew)?
Of all the mounts im leaning towards the Summit mount. But don't know if I will need one with a drop.
Or I may be interested in the flaming river mount. But don't know if it will work with my CJ7 bracket. I sent an email to FR and they said it is a universal mount so it may work.
