split rear seat
jeepboy45
Old Time Jeeper
- Posts
- 1,239
- Thanks
- 2
- Location
- Altamonte Springs, Florida
- Vehicle(s)
- 1979 CJ-7, Newly rebuilt AMC 360!, fully rebuilt GM TH400, Quadra-trac TC w/Milemarker 2x4 conversion, AMC mod 20 rear w/1 piece Moser axleshafts, mod 30 front w/tie rod flip and castor correction shims, 4 in lift, Centech complete wiring harness, dual electric fans on 3 core aluminum radiator, tilt steering wheel, 20 gal poly gas tank, new J20 steering box, MSD 6A ignition combined with TeamRush distributor mods
I have a 2003 chevy tahoe with the third row of seats. The third row is actually two separate seats that can fold independantly. I was thinking how nice that is, and was wondering if anybody has done a split fold / tumble seat set up in their CJ and how much of a PITA it is... Any special brackets needed.
I have a light grey rear bench I grabbed from a later model wrangler (not sure exactly which model or year). Its been sitting in the garage for years because I didnt have the brackets or hardware to put it in the 79 CJ7 ..
Just wondering if its worth spending money for a split rear seat, or just mount the full fold and tumble..
any thoughts?
brian
I have a light grey rear bench I grabbed from a later model wrangler (not sure exactly which model or year). Its been sitting in the garage for years because I didnt have the brackets or hardware to put it in the 79 CJ7 ..
Just wondering if its worth spending money for a split rear seat, or just mount the full fold and tumble..
any thoughts?
brian