sticker design vote
Cheepjeep85
Crazy Sr. Respected Jeeper
- Posts
- 4,934
- Media
- 57
- Thanks
- 0
- Location
- Chickamauga, Ga
- Vehicle(s)
- 1985 Jeep CJ7, 258, t-176, D300, AMC20, D30
you got it right, hit the nail right on the head.
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
sticker design vote
- Thread starter elwood blues
- Start date Start date:
- Last post Last post:
mylittlecj5
RIP Mike, we'll all miss you
My bride wants to vote for #4, with #5 as a backup.
CJLaredo83
Jeeper
- Posts
- 22
- Media
- 5
- Thanks
- 0
- Location
- Cherry Hill, NJ
- Vehicle(s)
- 1983 CJ7 Laredo.
4.2L 258 with Offenhauser intake and Holley 4BBL
Purchased it as you see it, wanted all stock but saw this one and grabbed it.
All new paint, Rhino Liner all inside won't ever rust.
Repairing little things, speedometer, switches, gauges, etc.
Put a new exhaust on it as well.
Voted for number 1, agree no color, neutral is better. Would def get one when it comes out, thanks
CJim7
Crazy Sr. Respected Jeeper
- Posts
- 3,590
- Media
- 1
- Thanks
- 4
- Location
- Twin Falls ID
- Vehicle(s)
- '84 CJ7 - 430hp 401 on propane - T18a/D300 twinsticked, Superior axles, Lockers, full boatsides, Warn 8274, OBA, 36" TSL's.
Yessss!!! Go #1 !!! :booze:
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 50
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
back to the top of the list
CJ007
Old Time Jeeper
- Posts
- 1,351
- Media
- 75
- Thanks
- 0
- Location
- Peoria, AZ
- Vehicle(s)
- 83' CJ7-35's, granny T18, clocked, locked, 456s, D30 20 trussed- stitched-heim traction-1 piece shafts, CV dshaft, quick discos, xtended shock mounts, SOA, revolvers rear, braided lines, herculined, hand throttle, AMC saddle bags, rebuilt 258, D300.
Looks like I commented before and didn't vote or something 
.
Seems like there may need to be two stickers? One for original restoration (or orig owner) and those that run trails and have broken most of their stock stuff
.
. Seems like there may need to be two stickers? One for original restoration (or orig owner) and those that run trails and have broken most of their stock stuff
.
Last edited:
Dano12771
Jeeper
Can someone remind me when we will know the winner? Also, I agree that it would be great to have a windshield banner, sorry I can't remember who mentioned the idea.
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 50
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
Voting closes next Sunday. Sorry Dano, as of right now we're going to stick with a small sticker, weather it be round, oval or rectangular. If those are popular, i.e. I sell out of them, then we'll look at doing windshield banners.
Dano12771
Jeeper
Thanks for the info. Elwood
CJKrawler
Old Time Jeeper
Just to clarify, #1 is a 7. The Grille is the giveaway, TJ's do not have the turn signals under the headlights.
I am a bigger fan of the round ones than the windsheild banner. How much longer until we have a final on this?
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,248
- Featured
- 3
- Media
- 361
- Resources
- 2
- Thanks
- 88
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
Come on elwood blues can you please tell us about 4 more times when this poll will end.
And also tell us about 3 more times if that is a CJ or a TJ in sticker #1
And also tell us about 3 more times if that is a CJ or a TJ in sticker #1
And how about a windshield banner?
ken98k
Senior Jeeper
- Posts
- 807
- Media
- 5
- Thanks
- 0
- Location
- North Pole, Alaska
- Vehicle(s)
- {1980 cj-5, 258, t-176, d300 amc20 rear, D30}{1974 cj-5, 304, T-15, D20, D30 front, D44 rear}{1973 cj-5, 304, t-98,D20, amc20, D30}
{1990 yj 2.5L i-4 AX-5 NP231 Dana 30 front Dana 35c rear}
1996 XJ Cherokee 4.0 HO
{2000 silverado}
{1979 Cadillac Sedan DeVille}
Seems to be staying pretty much a tie between 1 & 3. Why not just make both designs available?
With this logo popping up on jeeps all over the country, this has the potential to be very lucrative for the owner of this site, and not from just selling decals.
With this logo popping up on jeeps all over the country, this has the potential to be very lucrative for the owner of this site, and not from just selling decals.
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 50
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 50
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
Very interesting idea, I'll look into what the price would be to order let's say 50/50 of each instead of 100 of one design.
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 50
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
Good, because we aren't doing windshield banners right now
Voting for a design closes next week, after that a quick vote for round/oval or rectangle. Then I'll be putting in the order, which I would like to have in before the end of January. Realistically by the middle of March.
CJKrawler
Old Time Jeeper
Good, because we aren't doing windshield banners right now
Voting for a design closes next week, after that a quick vote for round/oval or rectangle. Then I'll be putting in the order, which I would like to have in before the end of January. Realistically by the middle of March.
Thanks for the heads up. I didn't see when the poll closed until after the post
I was just adding my $.02 about the banner's, that's all.
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 50
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
It's cool CJKrawler, the biggest thing with the windshield banners is the cost. Plus, the added unknown of weather or not stickers are actually going to sell or not. I'm okay with being stuck with 40 or 50 round stickers that only cost $1 a piece, getting stuck with 20 windshield banners at $20 a piece.... You see what I mean? I'm serious when I say, that if the small stickers sell well, we'll look into doing windshield banners
two guns
Jeeper
When the time comes for one to order, can payment be made threw the paypal ?
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 50
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
Yes. Once I actually recieve the stickers, I plan to make them available for purchase via paypal or by snail mailing me whatever the final cost ends up being to include shipping. Then I'll snail mail them out to you.