stuck in 4Low
polish85
Active Jeeper
Got a problem. I put it in 4 low and drove the jeep around. When i tried to put it back in to 2 wheele drive it wouldnt move. Can anyone tell me how to maybe get it unstuck?
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
stuck in 4Low
- Thread starter polish85
- Start date Start date:
- Last post Last post:
Got a problem. I put it in 4 low and drove the jeep around. When i tried to put it back in to 2 wheele drive it wouldnt move. Can anyone tell me how to maybe get it unstuck?
ken98k
Senior Jeeper
- Posts
- 807
- Media
- 5
- Thanks
- 0
- Location
- North Pole, Alaska
- Vehicle(s)
- {1980 cj-5, 258, t-176, d300 amc20 rear, D30}{1974 cj-5, 304, T-15, D20, D30 front, D44 rear}{1973 cj-5, 304, t-98,D20, amc20, D30}
{1990 yj 2.5L i-4 AX-5 NP231 Dana 30 front Dana 35c rear}
1996 XJ Cherokee 4.0 HO
{2000 silverado}
{1979 Cadillac Sedan DeVille}
Try backing up
ThisGuyUKnow
Full Time Jeeper
- Posts
- 2,785
- Featured
- 2
- Thanks
- 1
- Location
- Harleysville, PA
- Vehicle(s)
- 1986 CJ7 Laredo 4.0,Nv3550,D300 Twin Stick,AMC20 3.31, 31 BFG
Honda vtx1800c
yeah start to back up slowly while you pull the lever back it should pop out. might make a nasty clunk but seems its the nature of d300s
Last edited:
CJim7
Crazy Sr. Respected Jeeper
- Posts
- 3,590
- Media
- 1
- Thanks
- 4
- Location
- Twin Falls ID
- Vehicle(s)
- '84 CJ7 - 430hp 401 on propane - T18a/D300 twinsticked, Superior axles, Lockers, full boatsides, Warn 8274, OBA, 36" TSL's.
If that doesn't work, pop the clutch a little bit while in reverse. The Transfer Case gets bound up and there is a lot of load on the drivetrain which makes it difficult to shift out of 4x sometimes.
polish85
Active Jeeper
cool thanks guys let me go try it right quick
ThisGuyUKnow
Full Time Jeeper
- Posts
- 2,785
- Featured
- 2
- Thanks
- 1
- Location
- Harleysville, PA
- Vehicle(s)
- 1986 CJ7 Laredo 4.0,Nv3550,D300 Twin Stick,AMC20 3.31, 31 BFG
Honda vtx1800c
waiting....
mylittlecj5
RIP Mike, we'll all miss you
Still waiting. I think I'll have a 
with my pizza while we wait...
Oh and to avoid this in the future, don't drive around with the hubs locked and the truck in 4wd on a hard surface. It can and will destroy your drivetrain!
with my pizza while we wait...Oh and to avoid this in the future, don't drive around with the hubs locked and the truck in 4wd on a hard surface. It can and will destroy your drivetrain!
ThisGuyUKnow
Full Time Jeeper
- Posts
- 2,785
- Featured
- 2
- Thanks
- 1
- Location
- Harleysville, PA
- Vehicle(s)
- 1986 CJ7 Laredo 4.0,Nv3550,D300 Twin Stick,AMC20 3.31, 31 BFG
Honda vtx1800c
mine just got deliveredStill waiting. I think I'll have a
CJim7
Crazy Sr. Respected Jeeper
- Posts
- 3,590
- Media
- 1
- Thanks
- 4
- Location
- Twin Falls ID
- Vehicle(s)
- '84 CJ7 - 430hp 401 on propane - T18a/D300 twinsticked, Superior axles, Lockers, full boatsides, Warn 8274, OBA, 36" TSL's.
Pizza....you guys suck :drool:
polish85
Active Jeeper
worked great! thanks guys!
CJim7
Crazy Sr. Respected Jeeper
- Posts
- 3,590
- Media
- 1
- Thanks
- 4
- Location
- Twin Falls ID
- Vehicle(s)
- '84 CJ7 - 430hp 401 on propane - T18a/D300 twinsticked, Superior axles, Lockers, full boatsides, Warn 8274, OBA, 36" TSL's.
One thing I discovered before I twinsticked my 300, was that gunk and buildup on the stock shift linkage will cause very tough shifting also. The design of the stock settup leaves me scratching my head sometimes.
Keep all that clean and maybe lube the linkage components a bit and it might shift better also.
Keep all that clean and maybe lube the linkage components a bit and it might shift better also.
polish85
Active Jeeper
got another problem...ill start another thread with it as well...i replaced all my brake shoes, springs, and levers and drums...when i go to bleed them i have zero pressure after i bleed them all? Also when i start driving there is a metal to metal grinding on the right front tire?!?!?! i took it apart and everything looks fine...any idea what else it could be...the lever is all the way down so thats out of the question.....help i need to drive to work tomorrow morning!!!!
now back to beer and pizza...Im having JETS Pizza if anyone knows about that!