tach and clock install

[cj7inthetwigs]

Just read my prior post I feel I should express that I don't mean to knock anyone. I am a member of this site for advice and others wisdom. I don't reply alot well because I don't know alot lol when it comes to cjs. Just wanted to clarify I'm not looking to start a cussin match and turn this awesome forum into something like the "other" sites. Thanks yall

Sent from my DROID RAZR HD using Tapatalk[/QUOTE]



Sent from my DROID RAZR HD using Tapatalk

 

[cj7inthetwigs]

Got one more thing, use the hole saw. Go SLOW! Drill your pilot bit first. Always use the bit in the hole saw as a guide only. I learned to reverse the guide bit on the hole saw (sticking) the drill bit in backwards and tightening the setcrew on the hole saw down that way your pilot or guide bit doesn't destroy any wires on the back side of the dash or whatever your drilling.

Sent from my DROID RAZR HD using Tapatalk

 

[Hedgehog]

CJ7inthetwigs - I fully understand your point of view as it relates to buying American. Unfortunately it is difficult to tell what is and what isn't made in America. So, many items are relabeled or built under contract along with the whole world wide economy mixing about everything where things are manufactured is almost impossible. I try to buy American when possible, unfortunately I wouldn't have half the tools I need if H.F. weren't there.