Tool for pulling the cap of the front hub
- Posts
- 355
- Media
- 1
- Thanks
- 0
- Location
- Klosterneuburg, Austria
- Vehicle(s)
- 1979 CJ7, 304 cui, TH400, Quadra-trac
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Tool for pulling the cap of the front hub
- Thread starter lutry
- Start date Start date:
- Last post Last post:
elwood blues
Always Off-Roading Jeeper
- Posts
- 6,024
- Media
- 71
- Solutions
- 1
- Thanks
- 53
- Location
- Export, PA
- Vehicle(s)
- 1978 CJ7 4.2L Comp Cam & valve train, MC2100 carb, MSD ignition, Dana 30 front, T18 trans, Dana 20 txfr, AMC 20 rear.
This thing?
It's called a dust cap removal tool, if you don't want to buy one, you can rent them at autozone/advanced auto/O'Reillys whatever is close to you.
mylittlecj5
RIP Mike, we'll all miss you
I use a good pair of channel locks to remove the cover. If you want to avoid any scratches, put a rag around it first.
But a good pry bar will take it off in a second by twisting the blade in from the back side.
But a good pry bar will take it off in a second by twisting the blade in from the back side.
- Posts
- 355
- Media
- 1
- Thanks
- 0
- Location
- Klosterneuburg, Austria
- Vehicle(s)
- 1979 CJ7, 304 cui, TH400, Quadra-trac
This thing?
Exactely yes, many thanks, will order one...
