• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

Tools for on the road

Tools for on the road
My jeep tools are dedicated to the jeep and stay in the jeep.
My tool box is strapped down along with everydangthing else :D
Add a bag of misc bolts and nuts along with 'baling' wire.
I also carry misc crimp on electrical connectors and spare wire.
Don't forget your rabbit's foot either :D:D
LG
 
I do have a check list. The best part of it is, in that rig, none of it is hung on the outside or in the bed. All the stuff resides in the wheel well tool boxes I made (think MB/GPW), the passenger seat tool box, in the engine bay/hood, or in the tire carrier. If only I could do the same in the JK---------------an ARB compressor is about the only thing you can fit under the hood in one of those.

:)
Now I know why you have that big motor in there! (LOL):cool:
 
Duffer - nice list, you my friend are truly prepared, but for what? So what would you say is the percentage of those items you have actually used on the trail? If it is high, is it from a lack of garage time, doing things with your vehicle it cannot handle or old age? Not trying to be mean or anything, I just would like to get a feel for the need for all that stuff. I'm a minimalist kind of guy and I think it is good fodder for discussion of what is enough. And like you said, this will vary greatly from owner to owner completely dependent on our originality - one of the things that set older jeeps and their owners apart from the rest!!

My jeep was not prepared for what I did with it. In the process of working on it, I took it for a spin and found some rocks to play on. I popped a tire in the process and did not have a jack let alone a wrench to change the tire -STOOOOPID. So I am now totally prepared for any tire issues I may have because of past experience.
 
Last edited:
Duffer - nice list, you my friend are truly prepared, but for what? So what would you say is the percentage of those items you have actually used on the trail? If it is high, is it from a lack of garage time, doing things with your vehicle it cannot handle or old age? Not trying to be mean or anything, I just would like to get a feel for the need for all that stuff. I'm a minimalist kind of guy and I think it is good fodder for discussion of what is enough. And like you said, this will vary greatly from owner to owner completely dependent on our originality - one of the things that set older jeeps and their owners apart from the rest!!

My jeep was not prepared for what I did with it. In the process of working on it, I took it for a spin and found some rocks to play on. I popped a tire in the process and did not have a jack let alone a wrench to change the tire -STOOOOPID. So I am now totally prepared for any tire issues I may have because of past experience.

Do you carry a 'plug-kit' for your tires? :confused:
I carry 'stuff' for my use, and for others if needed. We work as a team for trail repairs.
I also carry a can of starting fluid to re-seat a tire bead.:eek:
The tool that gets the most use. Is my on-board air compressor.
I also carry custom made jumper cables made from 1/0 arc welding wire. Those cables and various diameter 6013 arc welding rods. Have gotten a few folks home over the last 30+ years.
LG
 
Duffer - nice list, you my friend are truly prepared, but for what? So what would you say is the percentage of those items you have actually used on the trail? If it is high, is it from a lack of garage time, doing things with your vehicle it cannot handle or old age? Not trying to be mean or anything, I just would like to get a feel for the need for all that stuff. I'm a minimalist kind of guy and I think it is good fodder for discussion of what is enough. And like you said, this will vary greatly from owner to owner completely dependent on our originality - one of the things that set older jeeps and their owners apart from the rest!!

My jeep was not prepared for what I did with it. In the process of working on it, I took it for a spin and found some rocks to play on. I popped a tire in the process and did not have a jack let alone a wrench to change the tire -STOOOOPID. So I am now totally prepared for any tire issues I may have because of past experience.

:)
Being "Prepared" can and will mean different things to different folks, solely depending on there level of mechanical ability , knowledge and how they wheel & treat there equipment off road.

Basic tools, bailing wire, hose clamps, tape , stop leak , tire repair kits ,jack & lubricants along with a few others mentioned above are a given..........
What else you carry should be in the category of what you think is the weak link of your own Jeep and whether or not you have the mechanical savvy to fix or change those items while laying on your back in the mud. Point is no reason bringing U-joints if you don't know how to change them nor have the tools to do so! ........The other big question is where do you wheel and how extreme do you wheel? Are you alone or always with other folks?.........If your within cell phone or text range that Obviously lessens the load of spare parts needed...........survival gear , maps , water , energy bars , TP paper should always find a place on board.

I've been known to do some extreme wheeling......Hunting all over the West for 2 decades.....off road 50-60 miles 1 vehicle , small trailer, 3 guys , 8-14 days and never see another person again until we get back to the pavement........No GPS , No Sat phone or recovery electronics! Yes we broke U-joints, a front drive-line, springs and a few other things , but none of those kept us from returning.....in fact each year we would get smarter about what we needed to carry............As I look back in the tool kit now some of those items we carried after 20-30 years were still in there original boxes. What we did learn was most mechanical things we could fix or patch.......things like electronic components that cannot be tested that play a part in things like ignitions systems to make the motor run is what I would key up on..........for us back in the day that would have been points, condenser, rotor, Cap, coil, new plugs and plug wires......also some primary wire and a small multi-test meter.

Your mind and mechanical knowledge along with proper vehicle preparation before you leave will be the most important tool that you have on board.........our standard MO was always the same......once off the pavement , we were already in Survival mode.........take no chances and don't abuse your equipment.
Tell someone where your going and when you will return.

:D:D:D:D
 
Field U-joint chg'n is pretty easy, if the yoke isn't all messed up.;)
You need a bumper, 2 sockets and a BFH.:D
LG
 
It does occur to me that "Tools for on the road" would be far different from say "Tools for off the road". While very useful it seems to me that some of the tool lists are focused more on "off road" than they are on the "on road" needs.

I like these lists, they remind me just how short I am on some needed parts/tools/equipment.
 
It does occur to me that "Tools for on the road" would be far different from say "Tools for off the road". While very useful it seems to me that some of the tool lists are focused more on "off road" than they are on the "on road" needs.

I like these lists, they remind me just how short I am on some needed parts/tools/equipment.

Just to clarify Hedgehog...... I was referring to tools on your vehicle while you are driving it..........road was figurative not literal. I took liberties in assuming you use your jeep for what it was built for. Then again the only as* in assuming is the one who is doing it.:chug:
 
Yeah I kinda knew that, but I'm a literal sort and words mean things to me. a CJ can have many lives and they are made for all of them. Most are driven on the road far more than they are off the road. For those times when you are simply going from here to there then there is little sense in carrying more tools than is necessary for most on road problems. I have essentially two sets of tools. One set goes with me everywhere I go, the other gets added to the basic set when going in the back country. I think your original post, taken the way it's written has value in itself.
 
Just to clarify Hedgehog...... I was referring to tools on your vehicle while you are driving it..........road was figurative not literal. I took liberties in assuming you use your jeep for what it was built for. Then again the only as* in assuming is the one who is doing it.:chug:

I answered for the literal interpretation: urban and rual streets, highways; anything maintained by a municipality.

-Jon
 
Do you carry a 'plug-kit' for your tires?

Yes. The one I use is from Gemplers.

My wife and I like to have another rig along but if we waited for that to happen every trip, we wouldn't get much wheeling time so at least 50% is solo. Like Terry, we have busted a few times but to date, have never failed to make it home and I have been doing that for 50 years.

It is definitely "be prepared" but where does one stop? The only mechanical parts I carry are an extra set of drive flanges that fit either the front or rear. With a full float rear, things would have to be really messed up to keep you from getting out with just one operable axle and the winch.

And we ALWAYS have the full backpack gear along because on most trips it gets used anyway. I guess I bought the ultimate geezer protection last week when I finally invested in an ACR personal locator beacon. Not to big on having another 5 oz in the pack but probably worth it. However, that is something I would not have purchased solely for wheeling. More for backpacking well removed from any roads but it will be along for now on.
 
This is my toolbox, and what it holds. Pretty tight fit. On longer ventures, I've even tossed in my cordless drill & spare batteries.

DSCF1846_zpse90f8b01.webp

DSCF1859_zps31d85d21.webp

DSCF1860_zps18af3cc8.webp

DSCF1861_zps9c8fe67f.webp

CJaug2011-05_zps9dcd2610.webp
 
Last edited:
Yes. The one I use is from Gemplers.

My wife and I like to have another rig along but if we waited for that to happen every trip, we wouldn't get much wheeling time so at least 50% is solo. Like Terry, we have busted a few times but to date, have never failed to make it home and I have been doing that for 50 years.

It is definitely "be prepared" but where does one stop? The only mechanical parts I carry are an extra set of drive flanges that fit either the front or rear. With a full float rear, things would have to be really messed up to keep you from getting out with just one operable axle and the winch.

And we ALWAYS have the full backpack gear along because on most trips it gets used anyway. I guess I bought the ultimate geezer protection last week when I finally invested in an ACR personal locator beacon. Not to big on having another 5 oz in the pack but probably worth it. However, that is something I would not have purchased solely for wheeling. More for backpacking well removed from any roads but it will be along for now on.

Do you also carry a air compressor to refill that tire?
Also include some spare valve stems and the tool to install them.
LG
 
I have an early CJ so I carry the same tools that was standard issue in the Willys MB and Ford GPW in a tool roll in my under seat tool box.

ITEM PART NO. DESCRIPTION
A A-372 BAG, TOOL
B A-11765 ADAPTER, FLEXIBLE LUBRICATION GUN HOSE
C A-6855 GAUGE, TIRE PRESSURE
D A-213 GUN, LUBRICATION, PUSH-TYPE
E A-373 HAMMER, BALL PEEN, 16oz.
F A-734 PLIERS, COMBINATION, SLIP JOINT, 6".
G A-375 SCREWDRIVER, 6" BLADE
H A-596 WRENCH, OPEN-END, 5/16" X 3/8"
I A-597 WRENCH, OPEN-END, 7/16" X 1/2"
J A-598 WRENCH, OPEN-END, 9/16" X 5/8"
K A-599 WRENCH, OPEN-END, 11/16" X 3/4"
L A-600 WRENCH, OPEN-END, 3/4" X 7/8"
M A-5130 WRENCH, BRAKE BLEEDER SCREW, 1/4"
N A-377 WRENCH, ADJUSTABLE, 12"
O GP-17062 WRENCH, DRAIN PLUG
P 637635 WRENCH, SOCKET, SPARK PLUG, WITH HANDLE
Q A-692 WRENCH, WHEEL BEARING NUT, 2 1/8" HEX


I added a few items to that list - the big socket needed to turn the crack by hand - feeler gauge, electrical tape, fuses
 
Last edited:
For me it's one parts box and one tool box. Use the tool box in the drive way for most work....However, if I have to go to the shed to get a tool to do an "average job" that tool ends up in the jeep tool box as well. I've had to make repairs on mine as well as friends while on the trail. Hasn't failed me yet. Might have just jinxed myself.....
 
Besides the military satchel I mentioned earlier that I use for tools, I also have a box my dad had built me that fits behind the backseat. It also doubles as a bench to sit on if needed. I keep things like recovery gear, hydraulic jack, tarp, compressor, oil, can of bolts, duct tape, U-joints, rope, etc. all in one place. It's as tall as the fender well tops. With a piece of carpet over it (doubles for laying on the ground with) you can't tell it's there.
img_0662small.jpg
 
Lets not forget a roll of 'bailing' wire.
Or heavy duty tiewraps.
:chug:
LG
 
Oh yes, no doubt. With bailing wire and duct tape you can fix about anything! ;)
 
i'm pretty much a major minimalist when it comes to having "emergency" fix it stuff. this kit is not only in my jeep for both on and off road. but i have pretty much a duplicate i keep in my daily driving truck. and it's pretty much the same kit that i've had on every car sin i was a teen.(now 40)

for my kit i use surplus manual bags.

$(KGrHqEOKpIE7FKNBt7SBRc2o0Y(VQ~~60_35.webp

$(KGrHqR,!l!FFyUWhZObBRc2o3tdHQ~~60_12.webp

in it i keep:

1) good phillips tip screwdriver p#2
1) good flat tip screwdriver.
3) good cresent wrenches, 1 ea. small,med,large
2) vice grips, one flat jawed and one curved jawed.
1) med. to large ball pein hammer
1) 3 pound sledge hammer with the cross pein head(wedge shaped)
6) hose clamps, 2 small,2 med, 2 large.
1) small box of fuses. asst. amps
2) (jeep only) u joints and 4) u joint retainers.
1) set of wire nuts asst sizes
1) roll electrical tape
1) tire repair kit
1) sharp boot knife
1) tire pressure gauge
1) flashlight with in the package batteries

outside that kit i keep:
1) roll duct tape
1) cheap lighter powered air pump
1) 4 way lug wrench
1) (jeep only) high lift jack and larger metal plate to pt it on. in my cars i get one of those $20 shop jacks and put in the trunk instead of that crappy scissor jack.

with those items i can fix just about anything enough to limp me back to civilization. hasn't failed me yet in the 24 years i've been driving. now on my car i also keep a set of lights in the glove box.

1) head light
1) set of tails(that's how they come)
1) set side marker lights
 
I won't bother with my list, but it's like duffers.
I'd like to know where you can find/get/buy tool rolls?
Or are you just making them?

I carry lots with me, (in the Jeep) but some of it will stay in camp. Starter, distributor, fuel pump, etc.

Camp is a lot closer than driving home for parts from wherever I may be.
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$0.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  0.0%
Back
Top Bottom