Wanted studs/help!

[Panhead]

I'm looking for the 6 3/8" NF studs that are seated in the steering knuckle ('82 CJ) & end up going through the brake caliper dust sheild. Does anyone have some, need at least 4, or know of where I can purchase them. Thanks in advance for any help!

 

[IOPort51]

try McMaster-Carr industrial supply they have an asortment of 3/8" -24 TPI double ended studs. Grade 8.
McMaster-Carr
I bet there is a good chance the threads are different one end from the other. have you pulled one to check both ends for length and thread??

I'm looking for the 6 3/8" NF studs that are seated in the steering knuckle ('82 CJ) & end up going through the brake caliper dust sheild. Does anyone have some, need at least 4, or know of where I can purchase them. Thanks in advance for any help!

 

[Panhead]

I found the studs @ 4Wheel Drive Hardware. It is a splined stud to hold it in place and a small head which is needed to clear the 4-wheel drive spindle. I appreciate your help.