What carburator do I have?

[babyboomerboy]

Can someone tell me what carburator I have? I have 1967 Jeep CJ5 with a 225 v6 Dauntless Buick 225 V6 engine. I am trying to get a rebuild kit for it. I need the NAPA part number if possible. Thanks

 

[Cheepjeep85]

looks like a rochester 1bbl, could be a carter though. pull it off and see if there is a tag with numbers on it, numbers stamped on the fuel bowl, or stamped on the base plate.

 

[babyboomerboy]

looks like a rochester 1bbl, could be a carter though. pull it off and see if there is a tag with numbers on it, numbers stamped on the fuel bowl, or stamped on the base plate.

It has Rochester 2 Jet on the top of the fuel bowl, but I guess there are a lot of these and each takes a different kit. Thats why I need a number so I can get the right kit. Thanks

 

[Cheepjeep85]

There should be some sort of id numbers stamped on it some where I have a carb similar to that on my boat, if I remember right it was on the base plate and it was more of a letter designation than a number.

Sent from my DROID2 using Tapatalk

 

[babyboomerboy]

There should be some sort of id numbers stamped on it some where I have a carb similar to that on my boat, if I remember right it was on the base plate and it was more of a letter designation than a number.

Sent from my DROID2 using Tapatalk

Thank you for your response. I guess the only thing I can do is to just take the carburator off and really go around the thing till I find a number if there is one.

 

[Cheepjeep85]

That is what you need to do to find out what it is

Sent from my DROID2 using Tapatalk

 

[motomom]

ROCHESTER 2CG IVE HAD NO LUCK REBUILING THESE TROTTle shafts wear in carb not easy 2 fix ive got old holley dominater intake edelbrock 500 runs awesome