1973 CJ5 308 V8 Heater help needed
dabbrowne
Jeeper
- Posts
- 212
- Media
- 24
- Thanks
- 0
- Location
- Pleasanton Ca
- Vehicle(s)
- 1973 CJ5 (AMC 1976 360 5.9L rebuilt) V8 Edelbrock Weber 1406 4 barrel carb with TorqueFlite 727 Auto transmission, 31" tires, Dana 30 Front Diff, Dana 44 Back , Dana 20 T case.
Hello
The previous owner did not install the heater core. The heater box and motor is installed but since there is no pipes coming through the firewall I am assuming there is no core. Please see the pictures below.
I could really use some help on:
1)Where do the heater core hoses and drain come through the firewall?
2)Where do the two hoses attach to the motor?
3)Any way to get a cheap core? the new one cost $90.
Thank you
The previous owner did not install the heater core. The heater box and motor is installed but since there is no pipes coming through the firewall I am assuming there is no core. Please see the pictures below.
I could really use some help on:
1)Where do the heater core hoses and drain come through the firewall?
2)Where do the two hoses attach to the motor?
3)Any way to get a cheap core? the new one cost $90.
Thank you

Last edited: