1975 Emission Diagram for 232 6 cylinder

[cooperm]

I have a 1975 CJ5 with a AMC 232 i6 6 cylinder and carter carb. I lost all the emission control stuff. I would like to replace it but don't know what I need or how to hook it up. I would like to have a diagram if one is available. I have seen a lot of diagrams but non seem to fit my Jeep. They either have a different carb, engine or are for a different year. Seem the 1975 with the AMC 232 i6 was an odd setup. Thanks for the help.

 

[Peanut Butter]

Most 70's vehicles had the same basic system. You had an air pump that ran by a belt on the front of the engine. This connected to a diverter valve and then from the exhaust manifold to the carb with a diverter valve. Other parts of the system included vacuum controls, EGR valve, and a check valve. Here is a picture of what my 79 model looked like. I am also requesting to upload some general emission pdfs to the docs section. I'll let you know when that is done. Rod

 

[jdarg]

Online Jeep Service, Repair and Maintenance Manuals

Here's the authoritative source. The equipment varies very slightly depending on if you have a 49 state or CA Jeep. Don't quote me but IIRC '75 49 state Jeeps really only have the TCS system. No air pump, no cat, no EGR. I ditched the TCS on my 75 AMC 232 i6 . Runs stronger w/out it.

 

[Peanut Butter]

I posted a scan from a 1970's MOTORS repair manual a general guide to engine emissions. It is in the docs section. Might want to taje a look at it. Rod