• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

Build Thread A 1984 Black CJ7 Build - My never ending project/addiction

Highlights Only
Build Thread A 1984 Black CJ7 Build - My never ending project/addiction
Ultrunner said:
Welcome to the forum and to the life of Jeeping. Great find on the CJ! This place is awesome and a wealth of knowledge. Look forward to seeing where you go with yours.
Click to expand...

Thanks, but not much to do with it now. I bought it, and started this thread, in 2011 👍🏼 I’m sure I will do more things in the future, as stuff breaks, like with the AMC20 , but I’m good for a while now.
 
Man I remember thinking how beautiful your Jeep was when you bought it and how beautiful it still is


Sent from my iPhone using Tapatalk
 
gert said:
Man I remember thinking how beautiful your Jeep was when you bought it and how beautiful it still is


Sent from my iPhone using Tapatalk
Click to expand...

Thank you. It’s definitely been a fun project. It’s great to drive now, but there are some things I need to do at some point. The gas tank skid plate has seen better days and I want to change out the fuel pick up/float in the tank. I think it’s bad. It’s a 21 gallon tank, and the Jeep simply doesn’t run right when I get down to about a half tank 🤷🏼‍♂️ It becomes starved for fuel. One of these days I will fix it.
 
Awesome Jeep and love the black! Definitely stealing some ideas from you.

Just got mine a few weeks ago. A Cali jeep, 44k miles, with no rust and all original. AMC 304 , Dana 30 front, AMC20 rear, T-18 4 speed with granny gear, Detriot lockers.

Looks rough but all cosmetic. Just ordered Skyjacker 4" and hoping to get in a body shop in the next few months. Manifold pics are before and after.

IMG_E1227.webp

Original 1.webp

IMG_1358.webp

IMG_1405.webp
 
NC79Cj7 said:
Awesome Jeep and love the black! Definitely stealing some ideas from you.

Just got mine a few weeks ago. A Cali jeep, 44k miles, with no rust and all original. AMC 304, Dana 30 front, AMC 20 rear, T-18 4 speed with granny gear, Detriot lockers.

Looks rough but all cosmetic. Just ordered Skyjacker 4" and hoping to get in a body shop in the next few months. Manifold pics are before and after.
Click to expand...
Looks great. Good luck with the build! Here are some more recent pics from the day I got it inspected. A few things on the list of stuff to do coming up soon: new voltage regulator/alternator, gas tank skid plate to replace the rusty one, and new fuel pickup in the tank.

09C9DE01-E7D6-47E6-900B-ED77AC34706B.jpeg 5A89B2CA-6D0D-487E-8C96-77EC3979976D.jpeg B516BB80-2FEC-4829-A640-20567A12785B.jpeg C5741151-21BF-45F8-A990-E2B9D803CF33.jpeg
F82EF906-B7FD-41A9-947F-A9E888A1CC9B.webp
 
Last edited:
Very nice. Did you use Por 15 on your jeep? Happy with result?
 
NC79Cj7 said:
Very nice. Did you use Por 15 on your jeep? Happy with result?
Click to expand...
I used it on the frame when it was re-done. It seems to be nice, but the Jeep is parked in the garage a lot, so I’m not so sure I’m a great test of the product. I also believe the inside of the tub was done, but I can’t remember anymore.
 
diddy2003 said:
I used it on the frame when it was re-done. It seems to be nice, but the Jeep is parked in the garage a lot, so I’m not so sure I’m a great test of the product. I also believe the inside of the tub was done, but I can’t remember anymore.
Click to expand...
10-4. I plan to have underneath blasted then use Por 15. It will be garaged too. Few additional questions for you:

Do you like your seats?

What air cleaner cover do you have? Really like the black.

Do you plan on installing the factory rocker moldings or any decal kits?
 
Also, what kind of headers do you have?
 
NC79Cj7 said:
10-4. I plan to have underneath blasted then use Por 15. It will be garaged too. Few additional questions for you:

Do you like your seats?

What air cleaner cover do you have? Really like the black.

Do you plan on installing the factory rocker moldings or any decal kits?
Click to expand...
The seats are great. I’m very happy with them. Very comfortable and seem to be holding up very well.

I completely forget the brand/model of air cleaner. Sorry.

I like the all black look, so no rocker moldings or stickers.

They are patriot headers. I believe these are them:
https://www.summitracing.com/parts/...MI57iuirvP8gIVxdrICh3J7g-mEAQYAiABEgKlBfD_BwE
 
Really like those headers. I am going to get mine running like stock for now but planning to do performance upgrades after paint and body are done. Wish mine was a 360 but I think the stock AMC 304 will do fine after the upgrades.
 
NC79Cj7 said:
Really like those headers. I am going to get mine running like stock for now but planning to do performance upgrades after paint and body are done. Wish mine was a 360 but I think the stock 304 will do fine after the upgrades.
Click to expand...

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

I'm sure you will get good power out of it. My 360 had been rebuilt prior to me buying it. I'm sure its .30 over ish, but I really don't know. I know it has a nice cam, because it revs very freely. It even has a nice lump at idle. I did some oil mods when I got it. And then added the electric fan, griffin radiator, Holley 670 truck avenger, aluminum intake, headers, no cats, flow masters, K&N, and HEI. I'm probably forgetting some things. I don't even know what it has for power, but its very healthy. The Jeep flies, I just wish I had a fifth gear.
 
diddy2003 said:
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

I'm sure you will get good power out of it. My 360 had been rebuilt prior to me buying it. I'm sure its .30 over ish, but I really don't know. I know it has a nice cam, because it revs very freely. It even has a nice lump at idle. I did some oil mods when I got it. And then added the electric fan, griffin radiator, Holley 670 truck avenger, aluminum intake, headers, no cats, flow masters, K&N, and HEI. I'm probably forgetting some things. I don't even know what it has for power, but its very healthy. The Jeep flies, I just wish I had a fifth gear.
Click to expand...
That video is awesome. I hope to dive into the performance stuff late next year. I thought it would be a cool project with my Dad to rebuild the engine. I heard for the AMC 304 , the Holley 470 truck avenger would be good.

What kind of Flow Masters are you running?
 
They are Delta Flow 40s.
https://www.holley.com/products/exhaust/mufflers/street_chambered_mufflers/40_series_delta_flow/

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
diddy2003 said:
They are Delta Flow 40s.
https://www.holley.com/products/exhaust/mufflers/street_chambered_mufflers/40_series_delta_flow/

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
Click to expand...
Sounds great. I'm thinking of the 40 series or the FlowFX. The FlowFX are pretty new and seem to have a deeper roar base on other trucks I've heard.

Wish they made those bumpers you have in chrome or polished stainless steel.
 
diddy2003 said:
Looks great. Good luck with the build! Here are some more recent pics from the day I got it inspected. A few things on the list of stuff to do coming up soon: new voltage regulator/alternator, gas tank skid plate to replace the rusty one, and new fuel pickup in the tank.

View attachment 74919View attachment 74920View attachment 74921View attachment 74922
View attachment 74923
Click to expand...

The big question is how did you get it on top of the dam/walk way? I would think someone in Ashfield would flip!


Sent from my iPhone using Tapatalk
 
Masscj7 said:
The big question is how did you get it on top of the dam/walk way? I would think someone in Ashfield would flip!


Sent from my iPhone using Tapatalk
Click to expand...
Good eye. My bud owns the property, so I had to take advantage of it 👍🏼
 
Good deal, glad he doesn’t seem to mind me casting a line there every now and then. Just my two feet and no trash. The way it should be. Nice pond with nice shore access.


Sent from my iPhone using Tapatalk
 
Is your roll cage cover more of a leathered finish or denim finish?
 
You must log in or register to reply here.

Similar threads

P
Build Thread Bondo Brat
Replies
19
Views
531
Phoenix827
P
R
Build Thread First Jeep 1984 CJ7 Laredo, Midland, TX
Replies
17
Views
1,099
robandhooch
R
D
Build Thread '74 CJ5 frame off build
Replies
1
Views
136
KRUPP
KRUPP
H
Build Thread Heathicus's 1956 CJ5
Replies
6
Views
288
jzak
jzak
T
Build Thread $600 CJ5!
2
Replies
36
Views
1,646
Tim_Coble
T

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$25.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  12.5%
Contribute
Back
Top Bottom